Post a question or comment
Filter by location
Forum
Topic
Replies
Recent

Control Lightning

EBOM-2009 IEQc2.2:Controllability of Systems—Lighting
posted by  Ramon Gomez  on 

We are currently working in a facility that that has a system called "Softswitch" from the Lutron Electronics Co.

1
Thu Jun 7, 2012, 12:12 am

Car parking and increased ventilation

NC-2009 IEQc2:Increased Ventilation
posted by  Timo Rintala  on 

I have a office project with 250 car parking facility, underground and mechanically ventilated. We are going for increased ventilation credit in all spaces.

1
Thu May 24, 2012, 3:41 pm

Primer classification as non-flat paints?

CI-2009 IEQc4.2:Low-Emitting Materials—Paints and Coatings
posted by  Joseph Greene  on 

Are primers classified an non-flat paints in all circumstances?

1
Thu Jun 7, 2012, 12:18 am

Chemicals of Concern

General forums
posted by  Tom Lent  on 

Here's my take on what the credits are doing and some reactions from the HBN POV: The USGBC is taking very significant important steps forward with the Chemicals of Concern credits in LEED 2012.

1
Sat May 26, 2012, 2:03 pm

Tenant-Managed Recycling Programs + Varied Collection Cycles

EBOM-2009 MRc6:Solid Waste Management—Waste Stream Audit
posted by  Tamara Armstrong  on 

Aloha, Question 1: We are required to sort & weigh ALL building waste in our audit, but what about small tenant-managed recycling programs?

1
Thu May 24, 2012, 6:34 pm

LEED Neighborhood Development

EBOM-2009 SSc1:LEED Certified Design and Construction
posted by  Jessica Long  on 

If a building is part of a LEED Neighborhood Development project does that count toward this point for EB:O&M?

1
Fri May 25, 2012, 8:05 pm

Exemplary Performance

Schools-2009 SSc5.2:Site Development—Maximize Open Space
posted by  renee jimenez  on 

We are currently doing a project registered under LEED for Schools 2009 and are using CASE 3 of SS5.2.

1
Thu Jun 7, 2012, 12:23 am

Detailed Plant Simulation

CI-2009 EAp2:Minimum Energy Performance
posted by  Chilufya Lombe  on 

Hi, we have a project with a certain number of 'back up' systems for air conditioning.

1
Fri May 25, 2012, 12:29 pm

Fan Power in the Proposed Building Design (C&S)

CS-2009 EAp2:Minimum Energy Performance
posted by  TOMAS URIBE  on 

I'm working on a project pursuing LEED Core&Shell Certification and I'm not sure about the following matter: What is the correct approach when simulating fan power in the proposed case for ten

1
Tue May 29, 2012, 12:46 pm

EnergyPro printout vs EAp2-Section 1.4 Tables

NC-2009 EAp2:Minimum Energy Performance
posted by  Robert Robison  on 

Is it really necessary to fill out the EAp2-Section 1.4 Tables spreadsheet when it looks to me like EnergyPro provides all the same data in the exact same format?

1
Fri May 25, 2012, 3:17 pm