Many manufacturers state that a product is low emitting, and as a proof send Emicode certification/results.

We are trying to pursue this credit, by using municipal 'brackish' water for irrigation and toilet flushing.

Just trying to make my thinking on FTEs more clear: Does this follow? A. 1 office person working at an office desk for an 8-hour workday, 5 days/week = 1.0 FTE B. 1 office person working at an offi

In order to compare apples to apples (efficiency) lets assume the unit as lumens/Watt.

Hi Marcus, I was reading the discussion about modeling adjacent shading for the both models (baseline and proposed models) that you had with Mark Benson, but It's still not clear for me. I’m work

If my buiding type is not in Energy Star and I don't see it really in the 2003 CBECS PerformanceTargetsTable and I try to use what I think is closest.

We are working on a small scale LEED-CI project that the area is about 8,700 sf. We currently face a problem when filling the information in the template.

Few to none of my comments seem to actually get an answer. I'm trying to be as clear and straight forward as possible and the response I get is a copy/paste answer to a different question.

We have a residential project that wishes to apply for LEED-NC, due to climate conditions no HVAC system will be implemented and 100% of ventilation will be natural (no mechanical equipment at all)

For a CS project, we will show a plan of a typical floor with the layout. However, in the Views calculation spreadsheet do we need to include all floors or is one floor sufficient ?