Under Option 1 of the DES guide, there is a 10 point cap. I have a project connected to a district chilled water system that I have modeled following option 1 which is showing 8 EAc1 points.

Hallo, My team and I have reduced water use in a project through high-efficient flush fixtures by 40%. In addition, 100% of the water used for sewage conveyance is treated on-site to tertiary stand

In our Project we have an underground floor with retail program that has a larger projection that the ground floor which is also retail.

Good afternoon. Thank for the forum.

Is paint-grade molding (made from short pieces finger-jointed together to form a usable length) considered new wood or recycled wood (presumably 100% pre-consumer)?

The Plan requires biweekly inpections: 'Visual inspections shall be performed at least 2 times per month, with treatment if necessary.

To meet the minimum requirements from section 4 to 7 of ASHRAE 62.1-2007, we must comply with section 5.4 "Ventilation System controls", and for this we should include controls that enable system t

We're in a situation where two existing buildings, Building A and B, are in the same campus.

We are working on a new MOB with 4 of 6 tenant suites being completed at the same time as shell/core.

In a C&S warehouse project, I was wondering whether the racking system could be counted in the materials list (as long as put consistently in all MR credits of course)? I am not including the f