For those who are interested, here is a white paper that explores the inter-relationship between leadership performance standards and disclosure tools in some depth: http://www.jasongrantconsultin

In the section 8.4 Feeder conductors shall be sized for a maximum voltage drop of 2% at design loadand branch circuit condutors shall be sized for a maximum voltage drop of 3% at design load. I'm

We have had problems with wood veneers that blacken/discolor when installed over fire-treated NAUF substrate, especially with light-colored wood.

I am using sketchup and Daysim for daylight simulation for a school project. My results give me daylight levels for every hour, every day of the year.

On the table for Environmentally Preferable Products (Table 1 in the reference guide for MR2), under Roof AND floor AND wall for the insulation component, which version of the California "Practice

If pre-1993 plumbing fixtures are still in place (i.e.

Is it the system or the zone that must comply with the ventilation requirements?

I found the following reference guide addendum about the daylight measurement path: In the requirement it says: "Measurements must be taken on a 10 foot grid.." and in the calculations section it s

The EA 1.4 is self populated by EAp2.

My manufacturing facilty has more than one kind of process type water user, and they are very distinct.