Hi!

How can i gain points in my simulation with kitchen equipments?

I'm working on a project that has automation and i don't know how can i indicate this.

I think all kitchen...

Hello,
I am working on a building that has one of its corners closed by green walls and no roof. It's a "patio" on the first floor, the six floors over it have view to that patio, but they...

I have a roughly 48,000 sf church with the following breakdown by area and hours of use:

1st Floor:
4,100 sf Multipurpose Space used 16 hours per week
8,200 sf Common Space...

LEED Interpretations state that hard-wired lighting in residential units must be modeled identically in the baseline and proposed cases. Does this apply to college dormitories as well?...

Hello,
I am Sangmin of SGS Korea.
I have a few question regarding Interactive 90.1-2007 Compliance Forms - building envelope compliance documentation (mandatory provisions checklist...

In a building where a significant portion is "unconditioned", the baseline HVAC system type selected from table G.3.1.1.A shall be based on total area or on conditioned area only?

We are evaluating the feasibility of LEED certification for a stadium. Is ASHRAE Standard 90.1 applicable for a stadium? And are there any major difficulties pursuing the certification for this...

I had a response from an energy model reviewer indicating my r-value calculations are not acceptable because we failed to derate the 3.5" R-11 batt insulation per Table A9.28B of ASHREA 90.1-2007...

Hi,

How is possible to consider Exterior Lighting Energy Consumption on a Multiple Building Process where there is no specific boundary per each building?

How can it be considered...

I have a job where there are several Big Ass Fans. My problem is in determining how to model them in the energy simulation.

First, since HAP is being used, and there isn't anything to...