Hi,
I am not sure whether to class mechanical rooms which are free cooled by outside air as "conditioned" for the purpose of the baseline (so the baseline would be on system 5 in this...

For some external lights the LEED team claimed the...

Our project consists of renovation of 140,000 SF of an existing building, as well as the addition of 30,000 SF of new space. For whole building energy simulation, I see minimum requirement of 10...

The overall process load of our project turns out to be in the vicinity of 15% only. We are aware that 15% is absurdly low and unusual for plants. The factory owner, nevertheless, sent us a full...

For an existing building under major renovation would the mandatory provision 5.4.3.4 for vestibules be still applicable even if the project scope does not include any additions or plan...

We have a rough time seeking to reduce supply fan energy during energy simulations. Could anybody throw some light on the following account:

1.) The project on hand is a plant that...

I am doing energy simulations for a factory. I am seeking advice as to the following situation:

1.) Part 1: Load Estimating, Chapter 7 of the classic Carrier Manual states that “a...

Greetings,
In the project I'm modeling (C&S), I took the opportunity to use the CS 2009 EAp2-c1 ACP spreadsheet with integrated calculator.
I've come to reach 46% of Energy cost...

I have a...

Dear All,
I have a system 8 (...