Hi I receive several MSDS for the coatings that will be used in our project and inside them, the VOC content is measured in Europe (EU) which are usually expressed in percentage % (w/w).

Our project has access to 2 bus stops, 1 located just outside of the building's perimeter with 2 bus lines and the other one is the main one, whit main it means that's the one the 90% of the people

We are evaluating an international (non-US) project that would like to build 2 separate buildings on one single site.

I'm working on finalizing documentation for a LEED project. We have completed the calculations and are only looking about 15% savings.

One LEED site boundary has two individual LEED projects that are under construction under one contract by the same GC.

If you are registered for LEED v2.2, then you must follow AGMBC, 2005. As you mentioned, all 4 buildings must independently meet the requirements for the EQ credits.

As 1.6 is a standard low flow toilet, in order to further reduce water use is it better to specify a 1.28 gpf or a dual flush toilet? Thank you.

I'm not sure why this point is necessary, to be completely honest.

Hi all, We have a small LEED:CI project in a CS certified shopping mall. We don't have any direct outdoor air intakes, we take the air from the main atrium and give it to our space.

Hi all, We have a CI project in a CS v2009 certified project which achieved the development density points.