Post a question or comment
Filter by location
Forum
Topic
Replies
Recent

Registering an individual project under a Campus project

LEED Guidance for Campuses and Multiple Buildings
posted by  Sean Quinn  on 

Does anyone know if we can register an individual project under a master site with only the master site name and ID information and without actually having access to the master site project on LEED

1
Mon Aug 14, 2017, 5:55 pm

Building Entrances

NC-v4 EQp2:Environmental tobacco smoke control
posted by  Johanna Scogin  on 

We have some overhead rolling doors (for trucks to enter the garage portion of the commercial building) along with some man doors.

1
Mon Aug 14, 2017, 11:53 pm

View Preserving Shade

Retail-CI-v2009 IEQc8.1:Daylight and views - daylight
posted by  Lon Stephenson  on 

Is there any criteria as far as what a View Preserving Shade actually is? There are openness factors as low as 1%; yes, you can see through them, but not much.

1
Sat Aug 26, 2017, 11:33 pm

Recycled Water

CI-v4 WEc1:Indoor water use reduction
posted by  ESD Engineer  on 

The building our project is located in uses municipally supplied recycled water to serve the supply to the water closets and urinals. Can this be used to calculate additional savings?

1
Tue Aug 15, 2017, 9:09 pm

Equipment as per table 6.8.1.A 90.1-2007

NC-2009 EAp2:Minimum Energy Performance
posted by  Vassil Vassilev  on 

Greetings, In the project we are modeling, there are air conditioners which are supposed to operate in cooling mode at OA temperature close to the design heating OA. In this table and also in othe

1
Tue Aug 15, 2017, 4:50 pm

DES Engineering Analyis to Determine Losses Path 2

NC-v4 EAp2:Minimum energy performance
posted by  Ryan Hoffman  on 

The LEED v4 Reference Guide offers three was of determining equipment efficiencies, distribution losses, and distribution pumping energy: Monitored data, engineering analysis, and default values.

0

DES Path 2 Engineering Analysis for Losses

NC-v4 EAp2:Minimum energy performance
posted by  Ryan Hoffman  on 

The LEED v4 Reference Guide offers three was of determining equipment efficiencies, distribution losses, and distribution pumping energy: Monitored data, engineering analysis, and default values.

1
Tue Aug 22, 2017, 1:47 pm

Combined Purchasing

EBOM-v4 MRp1:Ongoing purchasing and waste policy
posted by  Ryan Hoffman  on 

The project in question is the north building of a 2-building, 1 million sf facility.

1
Mon Aug 28, 2017, 6:11 pm

material streams

CI-v4 MRc6:Construction and demolition waste management
posted by  Sean Quinn  on 

We are working on a project where there is not enough room for on-site separation, and the commingled waste will be picked up by the sorting facility.

1
Fri Aug 18, 2017, 2:41 pm

Alternate Compliance path for EU projects: IEQc2

NC-2009 IEQc2:Increased Ventilation
posted by  Shaily Rungta  on 

We are working on a v3 design phase project in Switzerland that is using SIA (swiss standard) as the design Ventilation rates.

1
Sat Aug 26, 2017, 8:51 pm