Hi, all Our team had a technical advice from USGBC reviewer, the comment is like below... " The LEED form indicates a total roof area (excluding mechanical equipment, photovoltaic panels, and skyl

We have an office project that will have some large rainwater collection tanks that will be used for irrigation.

Does anyone know if we can register an individual project under a master site with only the master site name and ID information and without actually having access to the master site project on LEED

We have some overhead rolling doors (for trucks to enter the garage portion of the commercial building) along with some man doors.

Is there any criteria as far as what a View Preserving Shade actually is? There are openness factors as low as 1%; yes, you can see through them, but not much.

The building our project is located in uses municipally supplied recycled water to serve the supply to the water closets and urinals. Can this be used to calculate additional savings?

Greetings, In the project we are modeling, there are air conditioners which are supposed to operate in cooling mode at OA temperature close to the design heating OA. In this table and also in othe

The LEED v4 Reference Guide offers three was of determining equipment efficiencies, distribution losses, and distribution pumping energy: Monitored data, engineering analysis, and default values.

The LEED v4 Reference Guide offers three was of determining equipment efficiencies, distribution losses, and distribution pumping energy: Monitored data, engineering analysis, and default values.

The project in question is the north building of a 2-building, 1 million sf facility.