Forum | Page 2 | LEEDuser

Forum » CS-2009 IEQc4.2

Topic	Replies	Recent
Paint in Parking Lot CS-2009 IEQc4.2: Low-emitting materials - paints and coatings posted by Maggie Hogan Skaug* on Jan 11, 2016, 2:42 pm* United States This is a follow up to a thread in 2012 regarding paint used to stripe parking stalls (enclosed parking... Last reply: Dwayne Fuhlhage, Jan 13, 2016, 10:56 am	5	Dwayne Fuhlhage LEEDuser Basic Member Sustainability and Environment Director PROSOCO, Inc. Wed Jan 13, 2016, 10:56 am
Document no materials and earn the credit CS-2009 IEQc4.2: Low-emitting materials - paints and coatings posted by LEED Pro Consultant* on Dec 8, 2015, 11:01 am* Mexico Hi, we are working in a Cold dark shell, therefore interiors and fit outs will not have any finish. I understand that if we include them in the Tenant Lease Agreement we do okay for the new... Last reply: Jon Clifford, Jan 11, 2016, 8:28 pm	1	Jon Clifford LEEDuser Expert LEED-AP BD+C GREENSQUARE Mon Jan 11, 2016, 8:28 pm
Paints on the tack welds- HVAC ducts CS-2009 IEQc4.2: Low-emitting materials - paints and coatings posted by Cansin Manyas* on Jun 8, 2015, 4:23 pm* Our S/C wants to use a zinc rich paint on the tack welds of the ducts and he argues that the amount is too low and negligible. I asked for the... Last reply: Cansin Manyas, Jun 16, 2015, 3:22 am	6	Cansin Manyas LEEDuser Basic Member Tue Jun 16, 2015, 3:22 am
Zinc Spray CS-2009 IEQc4.2: Low-emitting materials - paints and coatings posted by Andreas Soederberg* on Nov 12, 2014, 10:27 am* I am looking for a product to replace zinc anti corrosive aerosols. I have two questions: 1. Did I understand the LEED criteria correctly? That anti-corrosive aerosols would be classified... Last reply: Jon Clifford, Nov 14, 2014, 10:12 pm	1	Jon Clifford LEEDuser Expert LEED-AP BD+C GREENSQUARE Fri Nov 14, 2014, 10:12 pm
No VOC information CS-2009 IEQc4.2: Low-emitting materials - paints and coatings posted by Citlali Mora Bello* on Aug 8, 2014, 2:10 pm* Hello, We are working on a project that is trying to achieve this credit, but I've encountered two problems: 1. Some of the cut sheets do not specify the... Last reply: Jon Clifford, Aug 11, 2014, 1:07 pm	1	Jon Clifford LEEDuser Expert LEED-AP BD+C GREENSQUARE Mon Aug 11, 2014, 1:07 pm
ASTM Comparison CS-2009 IEQc4.2: Low-emitting materials - paints and coatings posted by Michael E. Edmonds-Bauer* on Jun 28, 2013, 5:38 pm* We have a paint that has been tested under... Last reply: Jon Clifford, Jul 28, 2014, 11:11 pm	2	Jon Clifford LEEDuser Expert LEED-AP BD+C GREENSQUARE Mon Jul 28, 2014, 11:11 pm
Acrylic enamel/lacquer in aerosol, non-flat CS-2009 IEQc4.2: Low-emitting materials - paints and coatings posted by Alicia Villanueva* on Nov 8, 2013, 4:05 pm* Good afternoon, does anyone know the... Last reply: Dwayne Fuhlhage, Jun 19, 2014, 11:44 am	1	Dwayne Fuhlhage LEEDuser Basic Member Sustainability and Environment Director PROSOCO, Inc. Thu Jun 19, 2014, 11:44 am
SCAQMD Rule 1113-Table of Standards1- Amended June 3, 2011 CS-2009 IEQc4.2: Low-emitting materials - paints and coatings posted by Lilian Seow* on Nov 28, 2013, 12:54 pm* Two issues: 1. Our project specification is basing the... Last reply: Dwayne Fuhlhage, Jun 19, 2014, 11:40 am	1	Dwayne Fuhlhage LEEDuser Basic Member Sustainability and Environment Director PROSOCO, Inc. Thu Jun 19, 2014, 11:40 am
International equivalent of VOC tests CS-2009 IEQc4.2: Low-emitting materials - paints and coatings posted by Ilya Zavaleev* on Jun 19, 2014, 10:50 am* Our project is located outside of US and pursues LEED for CS 2009. The local product manufactures declare VOCs for paints in accordance with Directive of European Commission 2004/42/EC.... Last reply: Dwayne Fuhlhage, Jun 19, 2014, 11:23 am	1	Dwayne Fuhlhage LEEDuser Basic Member Sustainability and Environment Director PROSOCO, Inc. Thu Jun 19, 2014, 11:23 am
Anti-corrosive primer and paint on external metal elements CS-2009 IEQc4.2: Low-emitting materials - paints and coatings posted by Joanna Bloniewska* on May 14, 2014, 8:06 am* We need to apply an anti-corrosive primer and paint on metal elements, which are anchored into external face of main precast... Last reply: John-David Hutchison, LEED AP BD+C, PMP, May 16, 2014, 3:12 pm	1	John-David Hutchison, LEED AP BD+C, PMP LEEDuser Expert Sustainability Manager BGIS Fri May 16, 2014, 3:12 pm