Background:
In a C&S building we suggest a Tenant fit out to comply with credit IEQ_c8.2, where we show meeting rooms, corridors and an office space layout resulting in a grater...

Sometimes in the energy bills a part of the costs doesn't depend on the energy that is used (e.g. the connection is paid even if one doesn't consume energy), while other costs are proportional to...

I am working on a model for a large retail space, and need to determine the hot water usage. Based on square footage,...

We have a project which qualifies for CS and can be treated as a single building. It is comprised of near 214,180 ft² that will be completely renovated (HVAC and other systems, except the...

Hello,

We have received a review from LEED saying that for the baseline model there are inconsistencies between the demand values reported in Table EAp2-5 and Table 1.4.
When...

Dear Sir,
There is a project with a office tower ,a hotel tower above the fifth storeys and a commercial podium below the fifth storeys. The office tower has its own entrance and is outside...

Hi,

we have a project in a country where local requirements set high standards for legionella protection, thus there are high requirements regarding the water temperatures and water...

I have a question regarding the...

While developing an energy model for a building, can we take a benefit of modeling considering shading from the surrounded building in the proposed case and not in the baseline?

We have a mixed use facility that is 34% hotel, 34% office, and 32% parking garage. The office is served by rooftop units with gas heat, the hotel rooms are served by PTACs with electric heat,...