Hi guys. We are pursuing LEED v2.2. Our project have five separate residential building. We will provide recycling area where each building entrance.

Mandatory provision 6.4.3.2 Setpoint Overlap Restriction When heating and cooling to a zone is controlled by separate thermostatic controls shall heating setpoint exceed cooling setpoint. In our C&

We have an existing building that lacked insulation in exterior walls as well as the ceiling.

Hi all, Thanks for the comments/feedback above. We have a small playing field/recreation field within our boundary adjacent to our building.

We are working towards achieving this credit for a large manufacturing facility that runs 24 hours a day with 3 manufacturing shifts.

Hi there LEED community, Our project team has just wrapped the performance period, and we are in the process of gathering documents and plan to submit our application in one week.

We are working on a Core & Shell project and our LEED site boundary includes a large parking lot and landscape area along with the building on the plot.

Hi Everyone According to 2009 version LEED reference guide there are two ways to calculate out native or adapted vegetation area.

My waste hauler has given receipts in both tons and yards. I am using tons for the credit, is there some conversion factor I can use? The receipts in question are for landfill and wood.

Our project has to achieve CA Title 24 which is more stringent than Ashrae 62.1.