Hi folks, This prerequisite says that the baseline water flow for lavotory and showerheads should be measured at 60psi and 80psi respectively.

I am using the program above to document IEQc7.1 There is an option for me to calculate the MRT for an individual room. In the project I am working on, I have multiple rooms.

The credit template requires the CO2 sensors to be programmed to generate an alarm when the conditions vary by 10% or more from the design value.

The review comments of the basic Commissioning of our project says the following " it appears that all systems included within the LEED-NC project scope of work have not been included.

It appears that the BDC Material and Resource Calculator (July 2012) provided under the credit resources incorrectly calculates the Regional Material percentage.

I am wondering if the tenant lease agreement can be used to specify undesigned elements for EAp2 similar to how it is used to achieve other credits.

Hello All, I have two questions about compliance with the mandatory provision: 1) Only the main air conditioning system should be evaluated with the tables in chapter 6?

Hello!

In the Sustainable Sites CREDIT 2/ OPTION 1 – Development Density - I don’t understand why “the density calculation is based on a typical two-storey downtown development…” Why not on a 1-storey or

In a manufacturing facility we have trucks and fork lift trucks entering the buildings.