Forum quick links
LEED CI - Energy Modeling Terms
CI-2009 EAc1.3:Optimize Energy Performance—HVACposted by SAMY Chamy on
Dear All:- Greetings I need some clarity in terms in the terms used in "LEED ID + C ref guide page no 172" what is meant by 1.Project area 2.Total Segment area of LEED CI project ECB energy s
Option 1
CI-2009 EAc1.3:Optimize Energy Performance—HVACposted by Azita Mousavi on
I'm working on an existing Building. the original building has its gold certificate CS and all main VAV roof top units are installed originally at 2008.
Option 2: ASHRAE 90.1-2007 Section 11?
CI-2009 EAc1.3:Optimize Energy Performance—HVACposted by Steve Gross on
Even though the credit language does not state it explicitly, I read "reduce design energy cost compared with the energy cost budget for regulated energy components" to mean "reduce the design ener
Chilled water flow and pipe sizes
CI-2009 EAc1.3:Optimize Energy Performance—HVACposted by Jayakumar Pamuri on
Hi All, I am here to post my query about chilled water system,flow and pipe sizes.
Bypaas VAVs and AHUs
CI-2009 EAc1.3:Optimize Energy Performance—HVACposted by monu goyal on
Hello to all, my query is our project is two floors in a 9 floor building. The base building developer has provided AHUs and chilled water supply.
Option 1 Zoning for a CI- Facility with out of scope areas withi
CI-2009 EAc1.3:Optimize Energy Performance—HVACposted by Saju Varghese on
Good afternoon. We are currently submitting templates for a University facility.
Passive House Certified Component vs Energy Star Products
CI-2009 EAc1.3:Optimize Energy Performance—HVACposted by María Fernanda Aguirre on
Hi, I am currently working on an LEED for Commercial Interiors Project and the HVAC Engineer has just heard about some ventilation units with heat recovery which are certified as Passive House Comp
Portable Air Conditioning.
CI-2009 EAc1.3:Optimize Energy Performance—HVACposted by Carla Lopez on
Dear all, For an office building project we will be using a PORTABLE AIR CONDITIONER to cool the IT room; the unit has a cooling capacity of 12,000 BTU (Reference: http://www.comfortstarusa.com/pro
Active Controls with a Fan Coil Unit System
CI-2009 EAc1.3:Optimize Energy Performance—HVACposted by Ciaran McCabe on
For a Fan Coil Unit system, with outdoor air being provided adjacent to the rear of the unit will the outdoor fresh air rate (from the main AHU) need to modulate to qualify as "active control" or i
LEED ID&C EAc1.3
CI-2009 EAc1.3:Optimize Energy Performance—HVACposted by Dave Cale on
I am pursuing this credit under option 2. My client has bought a 9 story building and the project in question is for 2 partial floors and three full floors.