Forum quick links
Epoxy Finishes
NC-2009 IEQc4.2:Low-emitting materials - paints and coatingsposted by shaun Andriano on
I've read through the list of previous comments, but am still a little confused based on the latest template updates.
Multi Layered App-Shop Primer-Primer-Topcoat VOC Numbers
NC-2009 IEQc4.2:Low-emitting materials - paints and coatingsposted by Nilufer Senses on
We have multi-layered, anti-corrosive coating application for the steel structural elements in the interior. Layering is like this: Shop Primer, Primer and Top Coat.
projected Perlite
NC-2009 IEQc4.2:Low-emitting materials - paints and coatingsposted by Emmanuel Pauwels on
We are using projected perlite on the inside of the building as a fire-resitance.
Updated/clarified primer voc limit
NC-2009 IEQc4.2:Low-emitting materials - paints and coatingsposted by Martha Norbeck on
Can you please update the FAQ section of LEED-NC v2009, IEQc4.2. The information on primers is out of date per interpretation/addenda #100001805.
Hi,
We are using asphalt as
NC-2009 IEQc4.2:Low-emitting materials - paints and coatingsposted by MAUDE PINTAL on
Hi, We are using asphalt as a coating on a concrete floor for interior parking.
paints for steel door
NC-2009 IEQc4.2:Low-emitting materials - paints and coatingsposted by Adi Negara, LEED AP BD+C on
where do these kind of paints fall under the Product Type of Table 1. IEQc4.2 Applicable VOC Limits ?
Specialty coatings: Dry erase paint
NC-2009 IEQc4.2:Low-emitting materials - paints and coatingsposted by Tiffany Moore on
I am evaluating a non-flat coating used to "paint" on a dry erase surface for a training room.
One paint / two applications / two standards?
NC-2009 IEQc4.2:Low-emitting materials - paints and coatingsposted by Nereyda Rodriguez on
We have a waterborne acrylic enamel that is used in two applications in our project. When applied to steel joists, conduit, etc.
Does high VOC primer have any adverse effect on air quality?
NC-2009 IEQc4.2:Low-emitting materials - paints and coatingsposted by Karl Heitman on
Ideally you would want everyone to use low VOC whether the product is applied on site or off site.
LEED approved paints and coatins
NC-2009 IEQc4.2:Low-emitting materials - paints and coatingsposted by Luis Galvan on
If a lacquer or varnish meets the low VOC criteria required by IEQc4.2 but does not state that it qualifies to meet LEED requirments.