Hello everyone, We are looking for an energy simulation software.

G3.1.1 exception c stating "For Laboratory spaces with a minimum of 5000 cfm of exhaust, use system type 5 or 7 that reduce the exhaust and makeup air volume to 50% of the design values during unoc

There are more and more companies making fan coil units with VFD motors, automatic variable supply air control rather than traditional 3-speed control, which gives them variable air volume capabili

We are completing an energy model for a concrete dome. We chose the dome structure because it is more energy efficient than conventional building types. This was a design decision.

Is it acceptable to conduct the LEED 2009 Energy Modeling using Carrier HAP 4.3 version?

We're working on a hotel that will have a reduction in hot water consumption throughout the hotel (particularly in the guestrooms, where 2.0 GPM showerheads and 1.0 GPM faucet aerators will be inst

in the energy modeling result using HAP, the heating load unmet hours turns out to be 2000, however it shouldn't exceed 300 hours, knowing that our system is chilled water not dx units and the Tsta

Under the credit information website with "Credits, Credit Details, Points, Thresholds" listed. The Path is noted as "12% new/8% existing (1 pt) while our template form notes 10 points documented.

I have two buidings on the same site/project boundry. Do I model the two buildings as one building?

We have a project that is a parking garage structure.