In the section 8.4 Feeder conductors shall be sized for a maximum voltage drop of 2% at design loadand branch circuit condutors shall be sized for a maximum voltage drop of 3% at design load. I'm

At he moment, we are modeling a buried building with a green roof (as part of the energy efficiency strategy) according to the appendix G of the ASHRAE standard 90.1 (2007) The question regards the

I'm working on a big building, mostly office but not exclusively, in Stockholm, Sweden. I'm currently working on a restaurant on the ground floor with an entrance from outside.

Dear Forum, I have the following issue: For the Certification of a Restaurant, there is an inside area that corresponds to cold storage rooms.

Hi, I am working on a hangar project.

I have two questions regarding exterior lighting and treatment of the LEED boundary in EAp2. 1.

A radiant tube gas can be associated with the table 6.8.1E ASHRAE 2007?

Hi, I have a doubt related to the service hot water system for the baseline building.

We are working on a library project that involves the renovation of an existing facility, and the addition of a new wing.

How do I set which the fan power limitation adjutment pressure drop I use at baseline? The standard display multiple values for MERV filters, exhaust and others. What should I use at baseline?