SSc8 includes a limitation in terms of the total initial designed fixture lumens emitted at an angle of 90 degrees or higher from nadir (for example, 2% for LZ2).

Our project is on an Urban site bordered by Public right of way on all sides. The property line that we will use as a Project Boundary is several feet outside the curb line.

Hi, I'm working on a LEED v3 project and We have an issue complying with this credit. Our project is basically a 24-hour operation project, however, some spaces do not operate for 24 hours such as

In the Bird's Eye View section of this credit, one of the FAQs stated: Are hospitals exempt from interior lighting requirements? Yes. Does this mean if we are doing a HC project, the interior l

My project is a city Transportation Center, on a triangular downtown infill site.

Hi All, My project consists of a large parking lot where all interior parking spaces are located under solar canopies and perimeter parking spaces are uncovered.

We have a new construction project on an existing campus setting. To make room for the new building, an existing sidewalk has been relocated along with the existing light standards.

Hi all, A question about industrial sites: According to ASHRAE 90.1- section 9.4.5 Exterior Building Lighting Power, lighting used for the following exterior applications is exempt when equipped

If you've got full cutoff fixtures you are usually set. However, if you have a situation like we had earlier, with some angled spotlights, you've got a problem.

We have a project located on a military base where we are lighting a parking lot classified in an LZ3 zone.