Thank you USGBC for Energy Performance Calculator. I remember the days before...where you had to make your own more or less whilst fumbling through projects.

We are in the process of certifying a LEED EBOM project. We have an inquiry for the required 12 months of continuous energy data.

The project building is gallery, museum. Museum category is not included in the Table - Base Ratios for parking spaces, by building type. What is the best option for calculation it?

Paula, has there been an official ruling from USGBC on whether REACH can be used under Option 2 for LEED projects within the U.S. If yes, is there a document that provides this information?

We have a CS warehouse that is struggling to achieve certification that will build out only restrooms and has no identified tenant to execute a lease agreement with.

We're designing a system based on renewable energy installation for new construction. A part of this installation would performed by aerotermal energy.

The points table can be based on rating system like NC, CS, School etc instead of BD&C

Good afternoon, I'm working for a design building company in France. We aim the LEED certification for a shop project. We try do get 2 points for the Green Power and carbon offset credit.

We have some overhead rolling doors (for trucks to enter the garage portion of the commercial building) along with some man doors.

If the building is connected to a DES system, do both the DES system as well as the building itself need to be modelled?