Hi Markus and all coleagues, In the Data center I'm about to start modeling, there are 4 IP rooms. Each of these rooms has IP load with a power density of 3.2 kW/m2 or 297 W/ft2.

Has this bonus point gone away? There is no longer a point awarded for achieving a diverted rate over 95%?

Hello, My understanding from the LEED manual is that the credit does not require provision of a dedicated cycle lane between the building and the bicycle network and I was wondering if someone cou

Hi all, This query follows on a similar theme to the previous topic. We are working on an existing building that is intending to improve the envelop performance by internally adding insulation to

Our project includes a community center and a multi-residential part.

Generally,in other categories, we have to perform to meet all prerequisites though we don't need any credits in the categories (suppose that we have enough credits that meet our goal.

I am currently working on a major project in South Africa that will provide diverse uses to the building occupants only as the site is fully enclosed for security reasons.

Option 1, Enhanced IAQ Strategies, paragraph B states spaces are to be exhausted where hazardous gases or chemicals may be present or used.

Light Pollution Reduction In this section of credit how i identify the mean lamp lumens. because the specification sheet of normally the lumens is mention. for ex.

Our project is a possible CS, comprised of office, residential and commercial spaces located in Mexico City.