Forum quick links
MERV 11 in garage unit
NC-v4 EQp1:Minimum indoor air quality performanceposted by Johanna Koch on
Do you have to have MERV 11 filters installed in the ventilation unit that is connected to a garage?
Ventilation Requirement for High Rise Residential
NC-v4 EQp1:Minimum indoor air quality performanceposted by Jay Murray on
Question: Is it necesary to hard duct ventilation air into each bedroom within the apartment?
Required spaces for IEQp1 calculator
NC-v4 EQp1:Minimum indoor air quality performanceposted by RDK E&S on
Hello,
Major renovation to existing building - EQp1 requirements
NC-v4 EQp1:Minimum indoor air quality performanceposted by Navisa Jain on
We have a 6 storey addition to an existing 4-storeyed building. The mechanical systems for the addition are separate from the existing systems.
Demand Control Ventilation
NC-v4 EQp1:Minimum indoor air quality performanceposted by Ricardo Sá on
Dear All,
CIBSE Narrow Plan Requirement
NC-v4 EQp1:Minimum indoor air quality performanceposted by gjn on
Hello everyone,
non-attainment area for PM2.5
NC-v4 EQp1:Minimum indoor air quality performanceposted by Francesco Passerini on
In Europe which parameters shall be considered to establish whether the site is non-attainment area for PM2.5?
Refrigerated Storage rooms ventilation requirements
NC-v4 EQp1:Minimum indoor air quality performanceposted by Luis Andrade on
Hello,
I have a doubt regarding the need to ventilate refrigerated warehouses or storage rooms.
Airflow monitor alarms
NC-v4 EQp1:Minimum indoor air quality performanceposted by Nancy Henderson on
We have several single zone RTU's that will need direct airflow monitors because the units have DCV. The contractor says the low OA alarm will be located on the units at the roof. They