See LEEDuser’s guidance on CS-2009 IEQc4.2 »
Post a question or comment
Credit Filters
Low-Emitting Materials—Paints and Coatings
Filter by location
Forum
Topic
Replies
Recent
Default Avatar

Determining limits for VOC content outside US

CS-2009 IEQc4.2:Low-Emitting Materials—Paints and Coatings
posted by  Ernst Schriefl  on 

All the limits on VOC content provided in the LEED reference guide (2009 edition) are minus water (g/L minus water or g/L less water).

0
Default Avatar

Thinner use

CS-2009 IEQc4.2:Low-Emitting Materials—Paints and Coatings
posted by  ilse angel  on 
Hi! does the use of thinner for cleaning purposes falls within the scope of this credit? Do we have to comply with the requirements of the rule 1143? Thanks!
0
Default Avatar

Fire Proofing for the Building Structure

CS-2009 IEQc4.2:Low-Emitting Materials—Paints and Coatings
posted by  Ali Soufan  on 

The building is steel structure, which will be painted with fire rated paint.

2
Fri May 11, 2018, 12:47 pm
Default Avatar

Zinc Spray

CS-2009 IEQc4.2:Low-Emitting Materials—Paints and Coatings
posted by  Andreas Soederberg  on 

I am looking for a product to replace zinc anti corrosive aerosols. I have two questions: 1. Did I understand the LEED criteria correctly?

1
Sat Nov 15, 2014, 3:12 am

Acrylic enamel/lacquer in aerosol, non-flat

CS-2009 IEQc4.2:Low-Emitting Materials—Paints and Coatings
posted by  Alicia Villanueva  on 

Good afternoon, does anyone know the VOC allowance for an acrylic enamel/lacquer in aerosol, non-flat? I do not know in which product type does this product falls into to take the VOC limit. Thank

1
Thu Jun 19, 2014, 3:44 pm

Document no materials and earn the credit

CS-2009 IEQc4.2:Low-Emitting Materials—Paints and Coatings
posted by  LEED Pro Consultant  on 

Hi, we are working in a Cold dark shell, therefore interiors and fit outs will not have any finish.

1
Tue Jan 12, 2016, 1:28 am
Default Avatar

Basement Parking and Plant Room Epoxy coating and paint

CS-2009 IEQc4.2:Low-Emitting Materials—Paints and Coatings
posted by  Palak Varshney  on 

We have three basements for parking and service areas like plant room etc. we are using epoxy coating on the floor and paints in plant room.

1
Thu Aug 31, 2017, 3:51 pm
Default Avatar

I don't think we need to

posted by  Craig Graber  on 
1
Thu Apr 1, 2010, 4:42 pm

converting VOC content

CS-2009 IEQc4.2:Low-Emitting Materials—Paints and Coatings
posted by  Adi Negara, LEED AP BD+C  on 

Hi I receive several MSDS for the coatings that will be used in our project and inside them, the VOC content is measured in Europe (EU) which are usually expressed in percentage % (w/w).

1
Wed Feb 22, 2012, 2:55 am

No VOC information

CS-2009 IEQc4.2:Low-Emitting Materials—Paints and Coatings
posted by  Citlali Mora Bello  on 

Hello, We are working on a project that is trying to achieve this credit, but I've encountered two problems: 1. Some of the cut sheets do not specify the VOC test methodology. 2.

1
Mon Aug 11, 2014, 5:07 pm