I'm working on a project in Norway and it is very difficult to get information from the contractor who is resistant to cooperation. It appears that one of the adhesive products is non-compliant, t

Just curious I am working on IEQ 4.1 and IEQ 4.3. Both give you the option to add indoor carpet adhesives.

Does anyone know with the New Form (V06) do we no longer have to upload more than 20% of the product sheets?

Does anyone know what category Smoke & Acoustic Sealant would fall under? I didn't find it listed in SCAQMD Rule 1168 and the categories in the LEED manual are a bit generic.

Doea anyone could advise what category of adhesive would be that? Would that be up to material used for acoustic insulation?

So without my knowing it, the contractor had laminate applied off site to some cabinets- our LEED Reviewer flagged the fact that we had left out contact adhesive but had included the laminate on ou

Question about LEED Interpretations #100000699 and ID#100000700. Do these mean that the adhesive used to adhere a roofing membrane no longer falls under the scope of this credit?

I am working on an acutal project. We have a product (polyurethan silicone, which already is in use) with an unknown VOC content.

I have evidence that the aerosol adhesive I am using is below the % VOCs per weight limit provided in the LEED Reference Guide for Aerosol Adhesives.

I've understood the LEED EQc4.1-4.3 requirements, including the reference standards, and have pursued LEED credits for these numerous times over the past 10 years, but have more recently have had p