We have two apartment buildings on one site. It meets all the requirements for a group since they are being built at the same time and by the same contractors and owned by the same owner. How do we register it? From what I can tell, we should be able to just add up all the areas for the site and for the building, but then I hear that if you check "two buildings" you get bounced. I have read everything available, but I still don't know how to proceed.
It is NOT a campus. We are only building two buildings, both of which we will try to certify.
Erin Holdenried
Sustainability Architect125 thumbs up
August 7, 2013 - 6:26 pm
Robert, register your project in the new Campus LEED Online platform. It was developed for both Individual Projects with a Master Site and Group projects (with or without a Master Site).
http://www.usgbc.org/leedonline/
Robert Wichert
Engineer9 thumbs up
August 7, 2013 - 6:42 pm
Yes, that sounds great, but the project is already registered as Project ID 1000032243. Although we haven't done a lot of work already, we have paid our fees and started the scorecard. Is all of that lost?
Erin Holdenried
Sustainability Architect125 thumbs up
August 7, 2013 - 7:30 pm
Is it registered in the new Campus LEED Online platform or LEEDonline v3?
Either way, if you need to set up a new Group registration, the information you have already input will not transfer to the new project. I would save pdfs of your LEED forms offline so that have a record of all in project info and can re-enter the information in the new registration.
You need to contact USGBC directly to cancel your old registration and transfer the registration payment you've already paid to the new project. USGBC will give you instructions on now to proceed.