I have the first LEED project in a campus. The project will be built on an existing parking lot and no new parking will be added within the LEED project boundary. There is an existing parking adjacent to the building site. My questions is if I can use 5 spaces in the existing parking for carpooling and van-pooling for this project.?
You rely on LEEDuser. Can we rely on you?
LEEDuser is supported by our premium members, not by advertisers.
Go premium for
Tristan Roberts
RepresentativeVermont House of Representatives
LEEDuser Expert
11478 thumbs up
November 1, 2013 - 9:31 am
Rezkar, yes, you can. You should be clear how much of the existing parking lot is included in your LEED project boundary, and be sure that those spaces serve the project building and not other buildings on the campus.
Rezkar Abdulmajeed
Architect/LEED APSANA Associates LTD
November 3, 2013 - 9:32 am
Hi Tristan,
Thank you very much for your feedback.
However, I should explain more a bout the project and would like to obtain your advice in the following:
1- We are building a new project on the existing parking. We will nod add any new parking (0 new parking) . and there is no parking allocated inside our LEED boundary, and I do not want to include any parking adjacent to our building into the LEED boundary (0 New and 0 Existing), all required parking will be off site, Can I still be eligible to this Credit? Is the %5 Carpooling and Van polling still required for this Credit.
2- Also, I have question with regard to the Credit SS.4.3 to provide stations for 3% parking capacity , how can I implement this if my boundary does not include any parking spaces? Can I use the parking spaces that are adjacent to my LEED boundary for this Credit without adding them into. the boundary. Your feedback is appreciated
Thanks
Rezkar
Lauren Wallace
LEED Project Reviewer, LEED AP BD+C, Senior LEED SpecialistCertifications Department Manager, Epsten Group, Inc.
39 thumbs up
November 20, 2013 - 3:57 pm
Rezkar,
Because you are not providing new parking, and the existing parking lot is not within your project scope, it is permissible to not include the parking within your LEED project boundary, though still attempt SSc4.3 and SSc4.4. When attempting SSc4.4, adding no new parking is an option that does not include the requirement to provide designated, preferred 5% car/van pool spaces.
My suggestion to you would be to include a narrative indicating that the parking is existing and not within the current project scope, and therefore, it has been excluded from the LEED project boundary. However, "x" number of parking spaces from the existing, adjacent parking has been allocated for the building users. Hope this helps!
Rezkar Abdulmajeed
Architect/LEED APSANA Associates LTD
November 26, 2013 - 10:30 am
Lauren,
Thanks for your feedback.
Yes, I believe I can pursue both Credits SS 4.3 (providing x number electric station) and SS 4,4 (no new parking and no spaces for carpooling/Vanpooling) without including the parking spaces into LEED Project Boundary. .
Thanks again .
.
LEEDme Lorenzi
ing. Giorgia Lorenzi15 thumbs up
July 3, 2015 - 10:16 am
Hi Rezkar,
I have a situation like yours (new project on the existing parking not adiacent to the building, not add any new parking, no parking allocated inside our LEED boundary, not want to include any parking into the LEED boundary) and we want to attempt SSc4.3 and SSc4.4 reserving parking lots as much as required by credits. Was you able to obtain these credits for your project?