Hello,

I am currently working on a LEED O+M v2009 recertification project which had solar panels (Photovotaic (PV) System) installed on the roof in 2005 and has an in-house meter (with Manuel recorded monthly usage) but is not run through the utility so the usage does not show up on the Electric bills... So the bills show the buildings usage after the solar power is used up by the building. If I enter this usage along with the Electric/Gas from the utility on Energystar; along with providing PM's and electric/gas bills along with the manually recorded solar readings will that be sufficient? The project is not stamped and thus is using the provide bills method for EAp1....The usage is constant with the previous submittal which achieved 5 points in EA credit 4. The property owner owns the Solar panels and does not trade or sell them... 

"The PV system is a roof mounted, racked array of 702 Kyocera (KSI) PV modules, Model KC167G supplied and installed by Spectrum Energy Inc. (SEI) and its subcontractor, Team Solar in 2005.  There are two racks with one rack consisting of two subarrays of 30kW each using a Xantrex PV30208 inverter. The second rack consists of one subarray of 40kW using a Xantrex PV40208 inverter. The racks also act as the equipment screen. The PV array is capable of providing a total peak DC power of 117.2 kW, DC under Standard Test Conditions (STC) and the system has a rating of 100 (100.818) kW, CEC.  The PV system is connected directly to the building’s electrical panel so it can directly supply the building with energy it generates."

Is there anything I am missing? Will the Manuel recorded monthly usage be sufficient?  Thanks for your help! I have been the LEED project manager for over 20 projects but this is the first time I have had one with On-site Solar.