See all forum discussions about NC-2009 SSc6.2
 Subscribe to new posts about NC-2009 SSc6.2 Post a new question aboutNC-2009 SSc6.2
See LEEDuser’s guidance on NC-2009 SSc6.2»
FAQs about SSc6.2 :

How can I achieve compliance if my project's stormwater control measures are outside the LEED project boundary?

I have 100-year data—how do I convert to 2-year?

Is it an acceptable strategy to capture the rainwater into tanks and discharge it into the public sewers after the rainstorm reducing the peak discharge?

Are there special considerations for international projects?

What performance threshold do I need to achieve for an Exemplary Performance point?

The calculations for this credit are always a headache! While our projects are usually awarded the credit, the equations in the LEED Reference Guide are helpful mostly for sizing a reservoir or cistern, but don't help you get to the final results. Does US

Why do the requirements focus on 1-year and 2-year, 24-hour storms?

Why include the 1-year storm in the credit requirements? Won't management practices for the 2-year storm be effective?

How can green roofs count as a stormwater control measure?

View answers »

Forum discussion

NC-2009 SSc6.2:Stormwater Design—Quality Control

parking rainwater

For table SSC6.2-1, we dont know how to describe BMP neither its TSS removal efficiency, because the rain water from the parking is directed and collected to be sent to a vegetated site outside the leed boundary. What should i put in those spaces?

0
Post a reply

You rely on LEEDuser. Can we rely on you?

LEEDuser is supported by our premium members, not by advertisers.

Go premium for $15.95  »

Wed, 07/02/2014 - 12:42

Hola Jorge, IMO, the description should be just what you wrote above "rain water from parking is collected to vegetated site". You can find the TSS rates in literature such as the NJ Stormwater Best Management Practices Manual: http://www.nj.gov/dep/stormwater/bmp_manual2.htm I hope this helps.

Add new comment

To post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.