See all forum discussions about NC-2009 IEQc4.2
 Subscribe to new posts about NC-2009 IEQc4.2 Post a new question aboutNC-2009 IEQc4.2
See LEEDuser’s guidance on NC-2009 IEQc4.2»
FAQs about IEQc4.2 :

How should graphic arts paint or coatings be categorized?

The standards referenced for this credit have been updated since those listed in the LEED Reference Guide – does our project need to follow the latest SCAQMD Rules and Green Seal editions, or the ones listed in the reference guide?

How should handheld aerosol spray paints be handled?

What are the VOC limits for primers? They seem to be listed in both GS-11 and SCAQMD Rule 1113.

View answers »

Forum discussion

NC-2009 IEQc4.2:Low-Emitting Materials—Paints and Coatings

Paints off-site

Default Avatar
Mike D
LEEDuser Basic Member
45 thumbs up

Are there any requirements on paints that are applied off-site on materials that are brought to site afterwards?

0
Post a reply

You rely on LEEDuser. Can we rely on you?

LEEDuser is supported by our premium members, not by advertisers.

Go premium for $15.95  »

Wed, 07/17/2013 - 15:35

No, only when applied on site. IEQ Credit 4.2: Low-Emitting Materials—Paints and Coatings INTENT To reduce the quantity of indoor air contaminants that are odorous, irritating and/or harmful to the comfort and well-being of installers and occupants. REQUIREMENTS Paints and coatings used on the interior of the building (i.e., inside of the weatherproofing system and applied on- site) must comply with the following criteria as applicable to the project scope1:

Thu, 08/01/2013 - 13:48

It is my understanding that if an element is painted outside of the site may not be considered for the calculations, but, what if the voc limit of the paint used for that element exceed the requirements and then is installed inside the weatherproofing system? May that be an issue?

Add new comment

To post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.