See all forum discussions about NC-v4 EQc2
 Subscribe to new posts about NC-v4 EQc2 Post a new question aboutNC-v4 EQc2
See LEEDuser’s guidance on NC-v4 EQc2»
FAQs about EQc2 :

Is all solid wood considered inherently non-emitting? I’ve seen sources that say only solid wood flooring counts as inherently non-emitting.

Our building is atypical, and the walls and ceilings are not clearly defined. How should we classify these components? 

Are throw rugs subject to the credit requirements?

If a ceramic tile receives a top coat after it is manufactured, is it exempt from the credit requirements?

What are the adhesives and sealants to be included in the documentation?

I'm looking for a certification that tells me if a given product will meet the LEED v4 requirements, but I don't see one in a given product area. Am I missing something?

When products claim that they meet California Section 01350, does the product also meet LEED v4 requirements for low-emitting materials?

How do I know if a product complies with LEED v4 or if it was tested under an older non-compliant standard?

In past versions of LEED, it was easy to specify VOC limits. Is the specification process the same for LEED v4?

Is there a VOC budget method for this credit?

What are the limits on the VOC budget method?

Do products applied to the weather barrier need to comply with VOC thresholds? 

If one part of my multicomponent wall system is not compliant, can I still get full credit?

View answers »

Forum discussion

NC-v4 EQc2:Low emitting materials

Paint Certification

Default Avatar
Rai Galang
Civil Engineer
BME & SONS INC
LEEDuser Basic Member
0 thumbs up

Just want to check if Green guard certification for the paint is approved for the LEED when applying for the Credit instead of Green Seal (GS-11) certification?

0
Post a reply

You rely on LEEDuser. Can we rely on you?

LEEDuser is supported by our premium members, not by advertisers.

Go premium for $15.95  »

Thu, 06/23/2016 - 01:56

Paints must meet both the general emissions evaluation and VOC content limits. Greenguard Gold certification (but not all Greenguard certifications) are one of several options for meeting the CDPH standard method general emissions evaluation. Refer to the most recent 3rd party certifications document on the USGBC website. For content look at VOC limits of the California Air Resources Board (CARB) 2007, Suggested Control Measure (SCM) for Architectural Coatings, or the South Coast Air Quality Management District (SCAQMD) Rule 1113, effective June 3, 2011

Add new comment

To post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.