Forum discussion
NC-2009 EAc5: Measurement and Verification
How can I apply for Option 3, if my project doesn't a whole building utility meter installed? Our LEED building is located on a "campus". So the campus does have a utility meter installed.
My question is, can we use a submeter, installed at the LEED building in order to provide USGBC with the utility data?
LEEDuser is supported by our premium members, not by advertisers.
Go premium forTo post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.
Is the gas consumption of stoves, ovens, etc. required under this point?
When should a project consider Option B instead of Option D?
Is there a requirement to model baseline energy use as being 25% process loads?
Does this credit specify how energy use should be measured?
David Eldridge
Energy Efficiency NinjaGrumman/Butkus Associates
67 thumbs up
August 4, 2011 - 6:52 pm
The campus submeter(s) for your building would still count as "whole building meters" for your project building, even though they are not owned by the utility.
As an example, many campus buildings could be served from a combination of electricity, steam, hot water, chilled water, domestic water, etc., and each of these that you have would require a submeter that serves only the project building.