I am also having trouble with this form. I have checked my data, made sure all the zero's are in place I even went as far as deleting all my work and starting over. Anyone have any suggestions? I am finding this most frustrating.
You rely on LEEDuser. Can we rely on you?
LEEDuser is supported by our premium members, not by advertisers.
Go premium for
Bob Korp
Manager of ProjectsBarry Isett & Associates
20 thumbs up
June 1, 2012 - 1:48 pm
Try entering 1 even if the reality is 0. The form doesn't seem to accept 0 as an answer.
Kay Sieck
LEED-AP O&M Spokane Convention Center & INB Performing Arts CenterSpokane Public Facilities District
3 thumbs up
June 1, 2012 - 2:04 pm
Did this and it didn't work either. I am at a total loss. Checked all my data, we are a convention center so FTE's are fun to start with. This is the second project I have certified so I know my work is correct. We don't have residence nor do we operate 8 hours a day five days a week.
I am at a loss.
Clint Newton
Project Manager105 thumbs up
February 13, 2013 - 3:37 pm
As Robert suggested enter 1 for the part time value and add 1 in the part time hours.
There is a glitch in the form and LEED Online knows about it. According to the note I got from them, I should wait until about March 1, 2013 to upgrade to the newest form. If I can't wait (and I cannot) I am to enter the 1 values in place of zeroes and check the special circumstances box. Explain what you fudged in that box and submit.
Other users values may cause different issues, so try entering all ones and see if the form reads as compliant. if that works, change one value at a time until you find the holdup.