Hi all,
On one of our project having 8 floor that was
occupied under only with fourth storey which has undergone with system 8 for Energy simulation.
In this case, I need guidance on whether we should take into account all 8 floors or just the fourth story when simulating the energy use of the entire building.
You rely on LEEDuser. Can we rely on you?
LEEDuser is supported by our premium members, not by advertisers.
Go premium for
Marcus Sheffer
LEED Fellow7group / Energy Opportunities
LEEDuser Expert
5906 thumbs up
January 27, 2023 - 2:03 pm
You only need to model the tenant space. There is specific guidance for how to model the tenant space with central systems in the LEED Reference Guide.
Rajat Wadhwa
March 21, 2023 - 3:47 pm
Hi Marcus, I am looking through LEED ID+C V4 reference guide and I am not able find the guidelines on how should I model my proposed HVAC system as well as Baseline, could you point me in the right direction?
Thanks!
Rajat Wadhwa
Marcus Sheffer
LEED Fellow7group / Energy Opportunities
LEEDuser Expert
5906 thumbs up
March 22, 2023 - 2:05 pm
Look under the Further Explanation section. Do you have a hard copy or the online version? I always use the online version as it is always up-to-date. The proposed gets modeled as designed. If there are base building HVAC elements then see the section called - Contribution of Base Building HVAC and Service Water-Heating Systems. For the baseline see the section titled - Building the Baseline Energy Model. All of this is in the Minimum Energy Performance prerequisite, not the Optimize Energy Performance credit.