I work with a commercial modular building fabricator preparing to construct an office facility on the east coast. In pre-construction planning for this project, the question of the "project site" has been raised. Is the project site where the modules are constructed, or where the final placement of the modules will be? Our facility is just within the 500 mile radius of the final site, so this leads to the potential issue. Our normal steel distributor is about 25 miles from our facility, but just outside of the 500 mile radius of the final site. So if the final site is considered the "project site," we will have to have steel shipped in from roughly 200 miles away from our manufacturing facility, instead of our typical supplier.