See all forum discussions about NC-2009 EAp2
 Subscribe to new posts about NC-2009 EAp2 Post a new question aboutNC-2009 EAp2
See LEEDuser’s guidance on NC-2009 EAp2»
FAQs about EAp2 :

Our project has a large process load—75%. Despite our efforts to make an efficient HVAC design, the cost savings are minimal. What can we do to earn this prerequisite and be eligible for LEED certification? Is there any flexibility in how we model the p

Can SHGC be higher in the proposed than in the baseline model?

Our process load is higher than 25%. Do we have to justify that?

Do I need to justify the electrical and fuel rates I am using in my model?

Our local code references ASHRAE 90.1-2010. Should I use that for my documentation, or 90.1-2007?

Can I claim exterior lighting savings for canopy lighting even though a baseline model cannot include shading elements?

The project is built on a site with existing exterior lighting installed. How should this be accounted for?

Can mezzanines open to floors below be excluded from the energy model?

How do I provide a zip code for an international location?

For a project outside the U.S., how do I determine the climate zone?

For a project outside the U.S., how do I determine the Target Finder score?

Do hotel rooms need automatic light shut-off control?

How commonly are the 90.1 mandatory compliance forms submitted as part of EAp2/EAc1?

The Section 9 space-by-space method does not include residential space types. What should I use?

Can the Passive House Planning Package (PHPP) be used to energy model for LEED?

Is it acceptable to model a split-type AC with inverter technology compressor as a heat pump, like modeling VRF?

Can the Trace 700 'LEED Energy Performance Summary Report' by uploaded to LEED Online in lieu of the Section 1.4 tables spreadsheet?

A portion of our building envelope is historic. Can we exclude it from our model?

Which baseline HVAC system do I use if my building has no heating or air conditioning?

For an existing building, do I need to rotate the model?

View answers »

Forum discussion

NC-2009 EAp2:Minimum Energy Performance

LEED online form

Default Avatar
Barbara McCrary
Mechanical Engineer, PE, LEED AP BD&C
HHB Engineers, P.C., Prattville, AL
LEEDuser Basic Member
63 thumbs up

I am assigned to fill out the LEED online form for EAp2: Minimum Energy Performance. Section 1.1B - Mandatory Requirements requires signature (via initials) by the Architect and Electrical Engineer. I am the Mechanical Engineer. Does anyone know how to allow the Electrical Engineer access to the form so he can put in his intials? We tried changing his "Role" to MEP engineer, and this did not help. I can put in his intials, but it then lists me as the Signatory person. Maybe this is the only way to do it? The Architect was able to put her intials on the form, and the she shows up as signing it. However she is an Administrator for the project.

4
Post a reply

You rely on LEEDuser. Can we rely on you?

LEEDuser is supported by our premium members, not by advertisers.

Go premium for $15.95  »

Mon, 07/18/2011 - 17:19

Have the project administrator invite the electrical engineer to the project and then assign them to the credit (EAp2) as well.

Tue, 07/19/2011 - 08:07

After the electrical engineer has been assigned to the credit, he can log in and sign the template himself.

Add new comment

To post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.