LEED Interpretation ID# 10421 for ASHRAE 90.1-2010 Adjusted Point Scale for LEED v2009 Projects

Silvia Ruiz

Civil Engineer & Sustainability Coordinator

Studio Domus

LEEDuser Basic Member

7 thumbs up

July 11, 2019

Hi,

I have a project that was register on February of 2015 and I’m working with ASHRAE 90.1-2010 in the Energy Model Software, I understand that I can use the interpretation 10421 to change the point scale and get more point with lower percentage, but I’m not sure if my project applies for interpretation 10421 and if does what other credits may be affected by that interpretation.

Post a reply

Marcus Sheffer

LEED Fellow

7group / Energy Opportunities

LEEDuser Expert

4454 thumbs up

Fri, 07/12/2019 - 16:18

Sounds like you can use it. If you use this method it could affect the advanced metering, renewable energy and green power credits..

Silvia Ruiz

Civil Engineer & Sustainability Coordinator

Studio Domus

LEEDuser Basic Member

7 thumbs up

Fri, 07/12/2019 - 16:45

Thanks for the response! Any advice on how to documented on the portal?? just make refence to the interpretation ID on the code selection box?