Forum discussion
NC-2009 EAp2: Minimum Energy Performance
What is meant by an Input Summary for the energy model documentation? I am using Carrier's HAP and there is no feature for printing off an Input Summary of everything. You can only print off the hundreds of pages that make up each component (window inputs, door inputs, space inputs, system inputs to name few).
If it's a summary you are supposed to create yourself, how does it differ from the Section 1.4 Tables.xls sheet you have to submit as well?
Thanks!
LEEDuser is supported by our premium members, not by advertisers.
Go premium forTo post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.
A portion of our building envelope is historic. Can we exclude it from our model?
For an existing building, do I need to rotate the model?
Our process load is higher than 25%. Do we have to justify that?
Our local code references ASHRAE 90.1-2010. Should I use that for my documentation, or 90.1-2007?
Can mezzanines open to floors below be excluded from the energy model?
How do I provide a zip code for an international location?
For a project outside the U.S., how do I determine the climate zone?
For a project outside the U.S., how do I determine the Target Finder score?
Do hotel rooms need automatic light shut-off control?
How commonly are the 90.1 mandatory compliance forms submitted as part of EAp2/EAc1?
The Section 9 space-by-space method does not include residential space types. What should I use?
Can the Passive House Planning Package (PHPP) be used to energy model for LEED?
Which baseline HVAC system do I use if my building has no heating or air conditioning?
Our project has a diesel backup generator. Should we include it in our energy model?
Can SHGC be higher in the proposed than in the baseline model?
Marcus Sheffer
LEED Fellow7group / Energy Opportunities
LEEDuser Expert
5909 thumbs up
October 5, 2010 - 8:45 am
This is the Energy Cost Budget Performance Rating Method (PRM) Summary Report.
Travis Haveman, P.E.
Mechanical EngineerNexus Engineering, Inc.
8 thumbs up
May 19, 2011 - 5:45 pm
What would be the equivalent of this if using EnergyPro?
Jennifer Fairchild
3 thumbs up
August 8, 2012 - 10:17 am
What is the equivalent Input Summary report for eQuest?
Marcus Sheffer
LEED Fellow7group / Energy Opportunities
LEEDuser Expert
5909 thumbs up
August 8, 2012 - 1:55 pm
eQUEST does not produce a cohesive input summary report. The information is in the .sim file. If you do a comprehensive job of completing Table 1.4 this should suffice. You could provide the SV-A reports for the HVAC systems. Anything else is not really needed.