Forum discussion

EBOM-2009 EAp2: Minimum Energy Efficiency Performance

See LEEDuser’s guidance on EBOM-2009 EAp2 »

How i can use Portfolio Energy Star to Colombia

November 24, 2015

Esteban Martinez

LEED Consultant
Green Loop

LEEDuser Premium Member

11 thumbs up

November 24, 2015

Hi,

We have a project that aims LEED EBOM certification. The project is a school. We enter the data of energy consumption and water consumption in Portfolio Energy Star. This project in Colombia obtained 22.9 KBTU / ft² for Site EUI, this score it was compared with the average of similar buildings in Santafe Springs, LA in United States, which have a similiar weather to Bogotá, Colombia. The average value is 44.2 KBTU / ft² for EUI Site. Can I use this information to document the prerequisite 2:minimum energy performance?.

Thank you in advance for your help.

Post a reply

Michael Smithing

Director - Green Building Advisory
Colliers International Ltd.

LEEDuser Basic Member

304 thumbs up

November 24, 2015 - 7:55 pm

You can use Portfolio Manager internationally. As long as the building is one of the types which receive an Energy Star rating you should use the Energy Star score to document the prerequisite and credit.

Portfolio Manager normalizes for location internationally.

Log in or register to post comments

Add new comment

To post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.

See all forum discussions about EBOM-2009 EAp2

Subscribe to new posts about EBOM-2009 EAp2

Post a new question about EBOM-2009 EAp2

See LEEDuser’s guidance on EBOM-2009 EAp2 »

FAQs about EAp2:

Our building includes a large laboratory space. Can our project benchmark under the Labs21 program?

We have an international project and the space type is eligible for an Energy Star rating. Can we pursue Case 1 to demonstrate compliance given the recently released alternative compliance paths for international projects?

We have a number of buildings on a single campus that we would like to certify at the same time. Is it possible to benchmark the buildings at the campus level?

I have a mixed-use building and am wondering if it is possible to pursue the prerequisite through Case 1. How do we proceed?

We have a building that consists of two attached structures and it’s unclear if we have to consider it a single building or if it should be certified as two separate buildings and benchmarked accordingly. How should we proceed?

How long is an Energy Star label valid to use with a streamlined approach for Case 1?

Our building includes heavy process loads that significantly increase the overall energy use in the building. If we submeter these loads, can we exclude this energy use for benchmarking purposes?

We have installed submeters on our building but the utility bill includes energy use from several other buildings located on the same campus. How do we reconcile this during the LEED review process?

When is it possible to exclude up to 10% of the building from EAp2?

What do I do if the number of building occupants, operating hours, or vacant space changes during the performance period?

If you pursue the streamlined path for an Energy Star label, should the performance period for EAc6 match the 12-month time frame of the label?

How do I account for computers with multiple monitors on Portfolio Manager?

How should I treat vacant space on Portfolio Manager?

View answers »