detailed framing plans and cut list examples

Phil Vanderloo

President

Hiline Builders Inc.

LEEDuser Basic Member

5 thumbs up

July 13, 2016

Hi, I need to produce detailed framing plans and cut lists as required for this credit. My time is very limited so I don't want to overkill on the requirement. Can someone share an example of what is typically submitted for this. Thank You

Post a reply

Gary Wheeler

Arch., LEED AP

LEEDuser Basic Member

0 thumbs up

Mon, 03/27/2017 - 18:23

I am assuming a photocopy of a truss diagram, or that of the framing plan. Assuming there is a framing plan. I would also guess a copy of whatever plan or section calls out the framing (example 2x8 DF Rafters 24"OC) in a clear way. Or perhaps part of the engineering calcs if those are available.

Ann Edminster

founder/principal

Design AVEnues LLC

LEEDuser Expert

8 thumbs up

Thu, 03/30/2017 - 01:18

For projects that have framing plans (not all do!), the only additional information needed is either wall framing diagrams (not typically done) or a reasonably comprehensive detail sheet showing typical vertical framing -- e.g., at intersections and openings. If there are manufactured trusses then yes, also provide the truss drawings.