Forum discussion
I'm assessing for daylight in an industrial project. Like example, the only regularly occupied area is only 50m2, and the other 1000m2 is manufacturing area which not regularly occupied, perhaps only 10 minutes check in every hour, then the inspector back to the office. So, the daylight area to assess is only in office area?
LEEDuser is supported by our premium members, not by advertisers.
Go premium forTo post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.
Is it possible to combine Options 1 and 2 for different spaces in the same building?
What spaces are considered regularly occupied and must be included in the calculations?
What daylight simulation software can I use for LEED compliance?
My office space will have cubicles with high partitions. Should I include those in my model?
What types of glare control are acceptable for this credit?
Do I actually need to submit the USGBC Daylight and Quality Views calculator?
Can electrochromic glazing qualify as a glare control device?
TODD REED
Energy Program SpecialistPA DMVA
LEEDuser Expert
889 thumbs up
January 24, 2018 - 2:23 pm
If the manufacturing area is not regularly occupied then yes, only the office would need to be assessed.