Completing Table for MRc4 - MRc7

Nicholas - Are you referring to the information you input into a form in LEED Online v3 (LOv3)? If so, can you please tell me the version of the form you are using (lower right hand corner)?

Nicholas - Please look at the form from LEED Online and look at its lower right hand corner. Does it say "Version 3.0" or does it say "Beta" or something else?

The reason I am asking is because the Version 4.0 and higher MRc3-7 forms don't have you input information into the form itself. Instead you input the information into the BDC Materials and Resources calculator, which is an Excel spreadsheet and I want to make sure we're on the same page. :)

Ok - Here are a couple things to consider.
1. The Project Team Administrator should consider making sure that all forms are updated to the current version. Read more at https://www.leedonline.com/irj/go/km/docs/documents/usgbc/leed/config/co....
2. If you are going to stick with using the Version 3.0 version of the form, have you filled in all the General items including number of items purchased (1 or more) as well as the MRc4 %s? Have you deleted any blank rows? Do you have the right credits checked off on the first page? Do you have the actual vs. default materials option selected on the first page and the value inserted? Without seeing the form that's about all the help I can provide...

Nicholas you DO have to fill in all the blanks, or the form won't register as complete. A pain, I know. If you have the form filled out, you don't want to update it at this point - you will lose all the info you already entered in to the form.

Hmmmm... My projects are under review, so I can't go in and check everything I did to make the form work. 1) Check to make sure you have enough documents uploaded to meet the minimum requirement, and added an "X" in the cutsheet column as applicable. 2) Do you have an lines that had a material listed, but then you deleted the information and (since you can't delete an individual line on that version of the form) filled in everything with "0"s? If so, make sure you put a "1" in the cell for the "Number of Items Purchased". It will calculate it as 1 item x $0 = $0, so it won't effect your material costs. 3) In lines where I deleted information I put in text "N/A" for the Name/Description column, thinking that the form may require text, not a number in that cell field. 4) The only other thing I can think of is that the form doesn't like to have "0" in the milage columns. Any material that had 0% regional value I put a "0" in the "% Reg" column, and then put a consistant number higher than 500 in the milage columns. In my case I put "501", but it could be "999", "1000", etc. I then added a note in the Special Circumstances portion of the template form to explain to the reviewer what I did. I hope something I listed helps!

Nicholas - Did you have any luck? I wanted to note that upgrading forms can be fairly quick - like 72 hours but you will have to re-enter all your data as Renee notes. I think one of the reasons that the v4.0+ forms went away from direct entry and to using an Excel spreadsheet was because the forms were so glitchy. If you can't get it to show complete, use Special Circumstances on the form to explain that you tried a lot of things and couldn’t get table to move to complete.

They will. In a recent Proven Provider pre-submittal call, the GBCI energy reviewer said that she doesn't look so much at whether the form is showing complete and in compliance as much as the data in the form and its accuracy.