Hi Everyone,
We have two different versions of the CPG! One with " Printed Date: July 2007" and one "Revised Edition 1.11, July 2011" that have completely different required efficiencies for mechanical systems. The reference guide, LEEDonline forms or the CIRs fail to address that. Which one should we use to meet the intent of EAc1.3 Option 1?
Thanks,
You rely on LEEDuser. Can we rely on you?
LEEDuser is supported by our premium members, not by advertisers.
Go premium for
Erik Dyrr
Director, Sustainable Buildings and OperationsKEMA
80 thumbs up
November 30, 2012 - 5:28 pm
We have always used the July 2007 version. I haven't seen an addendum or interpretation from USGBC about an update.
Marcus Sheffer
LEED Fellow7group / Energy Opportunities
LEEDuser Expert
5909 thumbs up
December 3, 2012 - 12:01 pm
Yep the one in effect when LEED 2009 came out is the one you must use. However if you used to more recent one it would likely be approved.
Marina Horchin
ESD4 thumbs up
December 3, 2012 - 6:32 pm
Thank you Marcus and Erik. We'll do just that. Since there is no specific guidance on the versions, I'll assume the older one will work just fine.
Thanks again.
Kasandra Martin
Designer3 thumbs up
December 27, 2012 - 2:28 pm
http://www.powells.com/biblio/9780974296913?page=customercomments#produc...
Is this the book you are referring to? I need to buy this and want to make sure it is only available to purchase and wasn't available online to view somewhere.