See all forum discussions about CS-2009 MRc2
 Subscribe to new posts about CS-2009 MRc2 Post a new question aboutCS-2009 MRc2
See LEEDuser’s guidance on CS-2009 MRc2»
FAQs about MRc2 :

How is construction waste accounted for when utilizing off-site construction, like modular construction or pre-fabrication of assemblies?

How does MRc2 work for projects pursuing a campus approach, or any project where waste management will be shared with other construction projects?

Can materials that have been unused and returned to the manufacturer as part of a “take-back” program contribute to the credit?

Should I include hazardous material such as lead-based paint in MRc2 calculations?

Should household-type trash from workers' lunches and office use be included in MRc2 diversion and calculations?

Can sending material to waste-to-energy plants count toward MRc2?

The requirements of this credit say that land-clearing debris does not contribute to the percentage of materials diverted from the landfill. What exactly is considered "land clearing debris"?

Oops! Our trash was measured by both weight and volume at different times. How do I standardize this?

The waste management facility we are using is providing us with monthly documentation specific to our waste, showing 80% diversion. They also have a published, facility-wide rate of roughly 20%, and they have no published rate for construction waste. Will

View answers »

Forum discussion

CS-2009 MRc2:Construction Waste Management

City of LA Recycling Rates Application

We are currently using an off-site materials recovery facility that is providing documentation each month showing specific weight breakdowns for Trash, Wood, Cardboard, Dirt, Inert and Metal. Using the specific weights, we are tracking 80% diversion. However, the City of LA publishes certified Recycling Rates for the haulers in LA, and the location we are using is only certified by the City for Mixed Solid Waste Recycling at 18.88%, and it does not have a certified recycling rate for Mixed C&D Waste. My concern is if USGBC will accept the diversion rate based on our actual weights, or if we need to switch facilities to one that has a city-certified recycling rate for Mixed C&D? Thanks

0
Post a reply

You rely on LEEDuser. Can we rely on you?

LEEDuser is supported by our premium members, not by advertisers.

Go premium for $15.95  »

Default Avatar
LEEDuser Expert
472 thumbs up

Mon, 02/11/2013 - 17:20

Kristy - If I were receiving actual breakdowns for my job’s waste and recycling (versus facility wide breakdowns for the month), then that is the documentation I would present to GBCI. I think the LI’s that you are referring to (https://www.usgbc.org/leedinterpretations/LISearch.aspx?liaccessid=3000 and https://www.usgbc.org/leedinterpretations/LISearch.aspx?liaccessid=10060) were written so if a person did not have actual project data they could use the averages for a facility.

Add new comment

To post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.