As part of our project the existing asphalt parking lot will be milled and the material will be reused in the new asphalt lot. The asphalt plant happens to be just across the highway. Will the material be eligable for both MRc3 and MRc2?
Thanks.
Forum discussion
As part of our project the existing asphalt parking lot will be milled and the material will be reused in the new asphalt lot. The asphalt plant happens to be just across the highway. Will the material be eligable for both MRc3 and MRc2?
Thanks.
LEEDuser is supported by our premium members, not by advertisers.
Go premium forTo post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.
Can I include reused furniture?
A material being reused contains recycled content. Can I count this under MRc3 and MRc4?
We are reusing a lot of equipment from another building. Can we count that?
Can crushed concrete, masonry or asphalt being reused onsite qualify as materials reuse?
Tristan Roberts
RepresentativeVermont House of Representatives
LEEDuser Expert
11478 thumbs up
July 17, 2013 - 10:55 am
Heather DeGrella
Sustainable Design Director, Associate PrincipalOpsis Architecture
71 thumbs up
March 11, 2014 - 8:06 pm
Hi Tristan,
I have always been thought that you could not double-count most credits in the MR section, with the exception of regional content. The reference guide says "Materials counted towards material reuse cannot be applied to MR credits for building reuse, construction waste management, recycled content, rapidly renewable materials or certified wood." This indicates that the project would not be able to submit for both MRc2 and MRc3. Were you indicating that the asphalt could count towards Construction Waste Management or towards Material Reuse, but not both?
Tristan Roberts
RepresentativeVermont House of Representatives
LEEDuser Expert
11478 thumbs up
March 12, 2014 - 12:10 am
Heather, I'm sorry that my wording was not clear. I would not double-count between MRc2 and MRc3. In some cases I could imagine having some leeway to apply a material to one or the other, but not both at the same time.
Heather DeGrella
Sustainable Design Director, Associate PrincipalOpsis Architecture
71 thumbs up
March 12, 2014 - 12:25 pm
Thanks Tristan - that clarifies.