See all forum discussions about EBOM-v4 EQp1
 Subscribe to new posts about EBOM-v4 EQp1 Post a new question aboutEBOM-v4 EQp1
See LEEDuser’s guidance on EBOM-v4 EQp1»
FAQs about EQp1 :

We have a VAV system where single AHUs serve multiple zones. Do we need to take outside air measurements at each VAV box?

Our building has a single fan that supplies outside air to multiple AHUs. Do we need to perform outside air testing at the supply fan or at all AHUs?

What if our systems do not meet the required outside air when systems are tested at worst-case conditions?

What if after our Preliminary Review we have to revise the ventilation rate procedure calculations and find that we need to make corrections to the system in order to meet the prerequisite? Can we redo the outside air testing after making corrections? Wou

My building has 80 AHUs providing ventilation to building spaces. Do I have to do the ventilation calculations and conduct outdoor air measurements for each one?

Our system cannot provide enough outdoor air to meet ASHRAE 62.1-2010 due to design limitations. How much outdoor air must we provide to meet Case 2 instead?

The outdoor air intake for our ventilation system is not accessible, and it’s not possible to measure the outdoor airflow directly. How can we determine the outdoor airflow for this system?

How do I find whether my project is located in a non-attainment area for particulate matter or exceeds the prerequisite ozone requirements?

What happened to the IEQ Space Matrix that was available to version 2009 projects? What should I reference to determine how spaces in my building should be categorized for this prerequisite?

View answers »

Forum discussion

EBOM-v4 EQp1:Minimum indoor air quality performance

ASHRAE Standard 62.1–2010, Sections 4–7

Can someone list the minimum requirements of ASHRAE Standard 62.1–2010, Sections 4–7? Thanks much.

0
Post a reply

You rely on LEEDuser. Can we rely on you?

LEEDuser is supported by our premium members, not by advertisers.

Go premium for $15.95  »

Default Avatar
Amy Boyce
VP, Sustainability Services
Cassidy Turley
LEEDuser Basic Member
0 thumbs up

Tue, 02/04/2014 - 19:44

Hi Jonathan. The requirements of 62.1-2010 can't be posted here, as they are copyrighted material, but the ASHRAE website does offer read-only access to the 2013 version of the standard on its Standards and Guidelines page. While not identical, this should give you an idea of what the requirements are for v4.

Fri, 02/07/2014 - 15:26

Thanks, Amy!

Add new comment

To post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.