Make sure that the documentation from the prerequisite (EAp2) is complete in LEED Online. The documentation for EAc1 is, for the most part, automatically filled out in LEED Online based on your entries for EAp2.
If you are installing sensors and controls, they should be configured per specifications. Surprisingly, these are occasionally mis-calibrated or even reversed, causing discomfort to occupants, cost to the owner, and system malfunction.
If you are installing a BMS, configure and program it to specifications. If there was any change in system specifications, make sure it is accounted for in the BMS programming.
All the design work is implemented during construction. Have the project architect ensure that the glazing is per your specifications and that the façade system incorporates a continuous air barrier.
When your final design is documented, run a final energy model for LEED documentation. Include the specifications and efficiencies of the system being purchased and installed.
