added ID+C example tab and additional instructions.
See all forum discussions about this credit »
Credit achievement rate
XX%
Upgrade to LEEDuser Premium to see how many projects achieved this credit. Try it free »
LEEDuser expert
Susie Spivey-Tilson
susie.spivey@cbre.com
CBRE
LEED Fellow, Senior Program Manager for Global Energy & Sustainability
LEEDuser’s viewpoint
Frank advice from LEED experts
LEED is changing all the time, and every project is unique. Even seasoned professionals can miss a critical detail and lose a credit or even a prerequisite at the last minute. Our expert advice guides our LEEDuser Premium members and saves you valuable time.
Credit language
© Copyright U.S. Green Building Council, Inc. All rights reserved.
Requirements
Use salvaged, refurbished or reused materials, the sum of which constitutes at least 5% or 10% , based on cost, of the total value of materials on the project. The minimum percentage materials reused for each point threshold is as follows:
See all forum discussions about this credit »What does it cost?
Cost estimates for this credit
On each BD+C v4 credit, LEEDuser offers the wisdom of a team of architects, engineers, cost estimators, and LEED experts with hundreds of LEED projects between then. They analyzed the sustainable design strategies associated with each LEED credit, but also to assign actual costs to those strategies.
Our tab contains overall cost guidance, notes on what “soft costs” to expect, and a strategy-by-strategy breakdown of what to consider and what it might cost, in percentage premiums, actual costs, or both.
This information is also available in a full PDF download in The Cost of LEED v4 report.
Learn more about The Cost of LEED v4 »Frequently asked questions
Can I include reused furniture?The answer to this question is available to LEEDuser premium members. Start a free trial » (If you're already a premium member, log in here.) |
A material being reused contains recycled content. Can I count this under MRc3 and MRc4?The answer to this question is available to LEEDuser premium members. Start a free trial » (If you're already a premium member, log in here.) |
We are reusing a lot of equipment from another building. Can we count that?The answer to this question is available to LEEDuser premium members. Start a free trial » (If you're already a premium member, log in here.) |
We are demolishing an existing building, crushing the concrete and stone, and using it as fill onsite. Does this count under MRc3?The answer to this question is available to LEEDuser premium members. Start a free trial » (If you're already a premium member, log in here.) |
Our project has access to building materials that were delivered for another project, and never used because that project was canceled. If we use these materials can we count them here?The answer to this question is available to LEEDuser premium members. Start a free trial » (If you're already a premium member, log in here.) |
Can crushed concrete, masonry or asphalt being reused onsite qualify as materials reuse?The answer to this question is available to LEEDuser premium members. Start a free trial » (If you're already a premium member, log in here.) |
Addenda
4/8/2016 – Updated: 5/4/2016
Form Update
Description of change:
Campus Applicable
No
Internationally Applicable:
No
1/15/2016 – Updated: 4/7/2016
Form Update
Campus Applicable
No
Internationally Applicable:
No
5/9/2011 – Updated: 2/14/2015
Reference Guide Correction
Description of change:
Note the following addenda under \'Calculating Materials Costs to Achieve MR Credits\' on page 337:Add the following after "...Furniture and Furnishings as long as this is done consistently across all MR credits.", "Exclude artwork, interior plants, and musical instruments."
Campus Applicable
No
Internationally Applicable:
No
2/1/2010 – Updated: 2/14/2015
Reference Guide Correction
Description of change:
In the sixth line of the second paragraph, replace "higher value (actual cost) in the calculations" with "higher value (actual cost) cost of the new equivalent item in the calculations"
Campus Applicable
No
Internationally Applicable:
No
4/1/2012
LEED Interpretation
Inquiry:
When a LEED NC project attempts LEED CI Indoor Environmental Quality credit 4.5: Low Emitting Materials - Systems Furniture and Seating as an Innovation in Design strategy, are they required to include the furniture costs in Materials and Resources credits 3 thru 7?
Ruling:
No, LEED NC projects are not required to include furniture in their calculations for MR credit 3-7 if using low emitting furniture for an ID strategy. LEED Interpretation #3901 states that although furniture does not have a dedicated credit in the New Construction rating system "since furniture can have an effect on indoor environmental quality, projects that include furniture in the scope of work are eligible to apply for an innovation credit based on LEED for Commercial Interiors (LEED-CI) IEQ credit 4.5, Low-Emitting Materials - Furniture." For project teams pursuing this credit as an ID strategy, the cost of the furniture is not required to me included in the total materials cost in Materials and Resources credits 3,4,5,6, or 7. The intention of this ID strategy is to easily reference a set of rigorous Indoor Environmental Quality requirements relating to furniture. While it is not required to include furniture in Materials and Resources credits project teams are encouraged to look for sustainable criteria synergies when purchasing furniture.
Campus Applicable
No
Internationally Applicable:
No
3/10/2008
LEED Interpretation
Inquiry:
Materials & Resources credits 3 through 7 state a default percentage of 45% of the total construction hard cost can be used as the Total Materials Cost for a project. We assume this is based on the U.S. construction market. We are working on a project in Europe that is pursuing a Platinum rating, for which the project team believes a more accurate default would be close to 30% of the total construction hard cost attributed to materials cost, while the other 70% is attributed to labor. This is due to the fact that in the European construction market, the labor costs far exceed the material costs, when compared to the United States market. Can we use a different percentage if we provide a letter from a reputable Contractor from Europe stating this fact? If not, what documentation would we need to provide in order to establish a more accurate default percentage for European projects? Please note that in Europe, it is very common to have no submittal process, making it very challenging to collect LEED documentation. The easier we can make it to gain accurate documentation information, while making the real goal to meet the credit requirements and intents, the better experience this project team will have implementing LEED on their project. This will increase the versatility of LEED, making it easier to implement, while still maintaining the same credit requirements and its establishment as a universal metric.
Ruling:
The project team is requesting a lower default percentage of total construction costs to qualify for MR credits 3 through 7. The project team states that due to the increase labor costs in Europe, materials account for a lower percentage of total construction costs. However, European markets vary - similar to the micro-markets in the US. One letter, from one contractor would not provide enough substantial evidence to support altering the default percentage for an entire continent. However in this instance, the project team does not need to use the default percentage. For MR credits 3 through 7 the project team has the option of using EITHER the default percentage (45%) or providing the actual materials costs (excluding labor and equipment). By following the latter approach, the project team will be able to determine if they meet the credit requirements based solely on the cost of materials. Additionally, please note that per MRc5.1 ruling 5/24/2004 and MRc4.1 ruling 8/29/2003 - if any materials outside of Division 2 through 10 are included in the total materials cost, they must be included consistently in all calculations. Applicable Internationally; Europe.
Campus Applicable
No
Internationally Applicable:
Yes
3/20/2009
LEED Interpretation
Inquiry:
With the recent down turn of the economy there have been many building materials that have been fabricated for buildings that will never be built. On our project, we have sourced structural steel that was already fabricated and ready to be installed in a project that will not be built. This idle steel has been resurrected to be used in a new job. To refurbish the steel, the rust has been grinded off and the ends of each beam are cut off where the old connecting plates were previously attached. The remaining length of each beam will be used in our project when possible. This will prevent the old beams from being scrapped, thus reducing the demand for virgin materials and reducing waste. Please clarify: does this reuse of structural steel contribute to Materials and Resources Credit 3, Material Reuse?
Ruling:
The project has requested a clarification regarding the reuse of steel beams that were not used for the originally specified project. Page 265 of the LEED NC 2.2 Reference Guide states for materials obtained off-site "the primary stipulation for qualifying as reused is that they have been previously used." This upholds the CIR ruling on 8/14/2003 that indicates that "the intent of the credit is to extend the life-cycle of building materials through re-use, rather than re-manufacture." This structural steel reuse does not contribute to MRc3. Applicable Internationally.
Campus Applicable
No
Internationally Applicable:
Yes
11/4/2002
LEED Interpretation
Inquiry:
This credit inquiry seeks clarification on how to account for reuse of materials "harvested" from an existing building for reuse in the same building. By definition, on page 188 of the Reference Guide: "Salvaged materials are construction materials recovered from existing buildings and reprocessed for reuse in other buildings." This seems to imply that materials from an existing building cannot be counted as salvaged materials if they are reinstalled in the same building.Our project includes deconstruction of a number of building components with the specific intent of reprocessing them for reinstallation into the building. For example, about 11,000 board-feet of old-growth timbers were harvested from the demolition of existing roof framing. The wood was milled and used throughout the building for architectural millwork features. Clearly, reprocessing was almost total. Also, over two hundred (200) doors were removed, restored to their original finish, fitted for new hardware, and reinstalled. About half were reinstalled into different locations. Some reprocessing was required. A number of other components, such as tack boards, blackboards, and display cases, were harvested, protected and reinstalled into new locations. The only reprocessing was to recondition and reinstall the components.We seek LEEDTM credit for the extensive salvaging work that was accomplished. To exclude the harvesting program we undertook seems an unintended consequence of the definition of salvaged materials. Can we include materials harvested from the building as salvaged materials? We have also considered the potential of applying for an Innovation credit for conducting a "harvesting" program. Is that a better approach?
Ruling:
It is important to make a distinction between salvaged building materials and building reuse. The goal of this credit is to reduce energy and resource impacts associated with production of new building materials, and also to encourage the development of a market in salvaged building materials.Credit MR 1; Building Reuse is intended to encourage the reuse of existing building shells and interiors. Components of an existing building which are reused in-situ are considered to apply toward the building reuse credit, not as salvaged materials.In this case, the roof timbers which were removed and reprocessed meet the intent of the salvaged material credit, since they apparently could not have been used for their current function in the existing building, but were salvaged for other valuable building components.However, the doors represent a component of the building which was reused as the same product, for the same purpose, in the same building. This type of reuse represents the goals of MR Credit 1.3, and thus can contribute to achieving the required 50% threshold for interior component reuse.Note that the materials in question cannot be counted simultaneously toward multiple credits (I.e. MR Credits 1,2,3,4,6, and 7). See page 187 of the Reference Guide for this discussion. Applicable Internationally.
Campus Applicable
No
Internationally Applicable:
Yes
10/1/2013
LEED Interpretation
Inquiry:
For retail projects, what items are considered casework and built-in millwork that must be included in the base building documentation (in MRc3-7 and IEQc4.4), rather than furniture?
Ruling:
There are typically two types of casework found in projects. The first is casework that is custom built – often from shop drawings – and specified in CSI Division 6. Included are custom millwork cabinets, countertops, custom desks, shelving, etc. These are base building (or real property) elements considered permanently installed. They may be assembled on or off-site.
The second type of casework is manufactured furniture. It is usually ordered from a catalog and found in the project specifications in CSI Division 12. These items are considered furniture and included in ID&C projects and only included in BD&C projects when they are consistently used in calculations. They are not base building items. Included in Division 12 are individual and group seating, open-plan and private-office workstations, desks, tables, storage units, credenzas, bookshelves, filing cabinets, and wall-mounted visual-display products (e.g., marker boards and tack boards). Items such as electronic displays and miscellaneous items, such as easels, mobile carts, and desk accessories are not included in the credits.
Sometimes furniture is semi-permanently attached using mechanical fastening systems due to operational use. These are not permanently installed and therefore are not base building elements. An example in a retail or hospitality setting would be a display that is bolted to the floor or moveable / semi-permanently-attached manufactured shelving. Consider these guidance definitions:
Permanently installed building product – in addition to those items that serve structural purposes, permanently installed building products are items that are affixed to the building without intention to be removed, either because the item is integral to the walls, ceiling, or floor, or removing the item will cause damage to building (i.e. real property vs. personal property). Examples include items found in CSI MasterFormat Division 6- Millwork as well as wall, floor, or ceiling finished such as ceramic tiles, or drywall, window and door frames (unless part of removable partitions, see definition for furniture), baseboards, siding, roofing, masonry, and permanently installed built in casework, such as shelving or countertops. Exceptions may exist for these examples.
Furniture - Items that are non-permanently affixed are considered furniture. This includes items that do not serve structural purposes and may be removed without damage to real property. Examples include desks, chairs, filing systems, retail displays, or removable partitions (including drywall and glass system partitions including doors) that can be readily removed and reused without damage to other partitions, ceilings, floors, or structure. Typically these items fall under CSI MasterFormat 2010 Division 12-Furniture, however some items may be specified in other divisions and there are exceptions to these examples.
Real Property – consisting of immovable portions of building. Distinguished from personal property. Items installed by tenants or for temporary use are considered personal property and not real property.
Campus Applicable
No
Internationally Applicable:
Yes
9/15/2006
LEED Interpretation
Inquiry:
Our project relocates an existing visitors center building to a nearby site. After relocating the building, an expansion to the building will be constructed equaling approximately 45% of the original building size. The foundation under the original visitors center building has to be abandoned and a new foundation is being provided. The function of the building and the ownership remain the same. A credit interpretation request (MRc32 ruling 11/4/2002) states that the Building Reuse credit is for buildings reused in-situ. This negates our ability to apply the existing building stock to the Building Reuse credit. We ask that you confirm this conclusion. We would like to pursue credits under Materials and Resources-Resource Reuse using the value of the existing building components. The value of the components will be substantial and we will likely pursue an exemplary performance credit as well. Please confirm the validity of applying the existing building\'s component values to the MRc3.1 and 3.2 points.
Ruling:
The project team is requesting confirmation that a building relocated to the LEED project site is ineligible for credit under MRc1 - Building Reuse. Should that ruling be confirmed, the project is requesting to apply the existing building components retained in the relocated project to the reuse materials component in MRc3. Relocated buildings are indeed ineligible for credit under MRc1. Relocation of existing building shell and components is consistent with the reuse of salvaged materials, and application of these reused materials to the MRc3 calculation is acceptable. Applicable Internationally.
Campus Applicable
No
Internationally Applicable:
Yes
7/2/2008
LEED Interpretation
Inquiry:
Our project team is requesting the ability to contribute Renaissance Specialty Veneer Product, Redwood Veneer towards MRc3.1 credit achievement. The intent of MRc3.1 is to reuse building materials and products in order to reduce demand for virgin materials and to reduce waste, thereby reducing the impacts associated with the extraction and processing of virgin resources. The redwood veneer product is produced from salvaged redwood logs which have been blown down or damaged during natural forest fire. Utilizing salvaged redwoods reduces the degradation associated with the extraction of virgin timber from sensitive forests. Renaissance Specialty Veneer Products has certified the harvesting of redwood trees through the Forest Stewardship Council (SCS-COC-00872). The FSC Chain of Custody number tracks the wood through the production process ensures that the sourcing of the redwood veneer is both socially and environmentally responsible. Our project is requesting recognition for the use of innovative new products which provide environmental benefit and meet the intent of the credit requirements. By salvaging and utilizing downed trees, Renaissance Specialty Veneer is reducing the stress placed on natural forests and demand on virgin resources. As product sourcing and material options continue to grow and become more unique, our project team is interested in selecting products which contribute to the progressions of sustainable principles and environmental stewardship. Please confirm whether our calculation of FSC Certified Salvaged Redwood Veneer towards MRc3.1 credit achievement is acceptable.
Ruling:
The project team is requesting clarification on whether products that contain salvaged logs can be considered a reused material. No, while the materials described likely qualify for MRc7, reused materials are materials that were manufactured, used for their intended purpose, and are being included in a build-out for that same purpose again. Items that were never placed into service, but are being re-sold, are not salvaged material. Applicable Internationally.
Campus Applicable
No
Internationally Applicable:
Yes
5/24/2004
LEED Interpretation
Inquiry:
Previous CIRs indicate that the mechanical and electrical components are to be excluded from the calculations for Materials & Resources credits 3, 4, 5 & 6. Please confirm that the total material cost excludes these components as well. The total material cost will either be the actual material costs of the Div 1-10 subcontractors or 45% of the total construction cost of the Division 1-10 subcontractors.If items from division 15 or 16 are assembled locally and can be included in the numerator for the total of the Regional Materials calculation, should the materials cost from division 15 and 16 be added to the denominator as well? Please clarify
Ruling:
CORRECTION, 10/25/05: To attain the materials cost using the default calculation option: begin with the total subcontractor charges (to the General Contractor) for CSI MasterFormat 1995 Divisions 2 through 10 ONLY (instead of all Divisions, as indicated in the original ruling). Applying 45% to this number (as the Letter Template does) will result in a conservative estimate of the materials costs in those Divisions.-----------------------------------------------------Original ruling:To use the default 45% calculation to generate a total materials value, project teams must enter total subcontractor costs of all MasterFormat Divisions. This is noted in the LEED v2.1 Letter Template. The resulting cost solely represents materials in Divisions 2-10 (currently this is not indicated in the Letter Template, but should be). These Divisions include the principal items that are considered in MR Credits 3 through 6. Materials in Div 11 through 14 are optional (item by item), and if included must be added to the numerator and denominator of the equation.If a project team chooses not to use the 45% default calculation to generate a total materials value, then follow the guidance provided in MR Credit 4.1 CIR ruling dated 8/29/2003: Materials in CSI MasterFormat Divisions 2 through 10 must be included. If a project team chooses to include additional items as part of the base material costs it should do so for all relevant material credits, which include MR Credits 3, 4, 5 and 6. See the MRc4.1 8/29/03 ruling for further details. Applicable Internationally.
Campus Applicable
No
Internationally Applicable:
Yes
4/13/2007
LEED Interpretation
Inquiry:
Kalamazoo College\'s Hicks Student Center is an existing building that houses a number of campus functions. To create a more dynamic Student Center, the building is currently undergoing a significant renovation. The existing food service and dining areas will be relocated from one part of the building to another area within the building. The Materials Reuse credit requires a 5% reuse of salvaged, refurbished or reused materials based on the total material value of the project. The credit does not allow mechanical, electrical and plumbing equipment to be included in the 5% material cost required. There are several new pieces of food service equipment in the renovated kitchen and food service area, but a significant portion of the existing equipment can be refurbished and reused. We do not consider the reused kitchen and serving items to be mechanical or electrical, but necessary equipment that is required for functionality of the space. Rather than simply discarding the existing and purchasing new equipment, we are responsibly reusing existing equipment that has remaining useful life, and would like to confirm your support in their application to MR credit 3.1. The example below is provided to show our calculation methodology: Value of contracts including Food Service Equipment: $5,680,133 + $1,165,000 = $6,945,133 Total material cost based on 45% (including Food Service Equipment): $6,8456,133 x .45 = $3,080,310 5% of material cost (reused materials): $3,080,310 x .05 = $154,016 Estimated Material cost for reused food service equipment = $200,000 (6.5%)
Ruling:
Consistent with the LEED-NC v2.2 Reference Guide, mechanical, electrical and plumbing components and specialty items such as elevators and equipment cannot be included in calculations for this credit. This credit is primarily for those materials in CSI Divisions 2-10, which is consistent with MRc4 and MRc5. Applicable Internationally.
Campus Applicable
No
Internationally Applicable:
Yes
Checklists
Step by step to LEED certification
LEEDuser’s checklists walk you through the key action steps you need to earn a credit, including how to avoid common pitfalls and save money.
Documentation toolkit
The motherlode of cheat sheets
LEEDuser’s Documentation Toolkit is loaded with calculators to help assess credit compliance, tracking spreadsheets for materials, sample templates to help guide your narratives and LEED Online submissions, and examples of actual submissions from certified LEED projects for you to check your work against. To get your plaque, start with the right toolkit.
Get the inside scoop
Our editors have written a detailed analysis of nearly every LEED credit, and LEEDuser premium members get full access. We’ll tell you whether the credit is easy to accomplish or better left alone, and we provide insider tips on how to document it successfully.
© Copyright U.S. Green Building Council, Inc. All rights reserved.
Requirements
Use salvaged, refurbished or reused materials, the sum of which constitutes at least 5% or 10% , based on cost, of the total value of materials on the project. The minimum percentage materials reused for each point threshold is as follows:
XX%
Upgrade to LEEDuser Premium to see how many projects achieved this credit. Try it free »
Got the gist of MRc3 but not sure how to actually achieve it? LEEDuser gives step-by-step help. Premium members get:
- Checklists covering all the key action steps you'll need to earn the credit.
- Hot tips to give you shortcuts and avoid pitfalls.
- Cost tips to assess what a credit will actually cost, and how to make it affordable.
- Ideas for going beyond LEED with best practices.
- All checklists organized by project phase.
- On-the-fly suggestions of useful items from the Documentation Toolkit and Credit Language.
In the end, LEED is all about documentation. LEEDuser’s Documentation Toolkit, for premium members only, saves you time and helps you avoid mistakes with:
- Calculators to help assess credit compliance.
- Tracking spreadsheets for materials purchases.
- Spreadsheets and forms to give to subs and other team members.
- Guidance documents on arcane LEED issues.
- Sample templates to help guide your narratives and LEED Online submissions.
- Examples of actual submissions from certified LEED projects.
Can I include reused furniture?The answer to this question is available to LEEDuser premium members. Start a free trial » (If you're already a premium member, log in here.) |
A material being reused contains recycled content. Can I count this under MRc3 and MRc4?The answer to this question is available to LEEDuser premium members. Start a free trial » (If you're already a premium member, log in here.) |
We are reusing a lot of equipment from another building. Can we count that?The answer to this question is available to LEEDuser premium members. Start a free trial » (If you're already a premium member, log in here.) |
We are demolishing an existing building, crushing the concrete and stone, and using it as fill onsite. Does this count under MRc3?The answer to this question is available to LEEDuser premium members. Start a free trial » (If you're already a premium member, log in here.) |
Our project has access to building materials that were delivered for another project, and never used because that project was canceled. If we use these materials can we count them here?The answer to this question is available to LEEDuser premium members. Start a free trial » (If you're already a premium member, log in here.) |
Can crushed concrete, masonry or asphalt being reused onsite qualify as materials reuse?The answer to this question is available to LEEDuser premium members. Start a free trial » (If you're already a premium member, log in here.) |
4/8/2016 – Updated: 5/4/2016
Form Update
Description of change:
added ID+C example tab and additional instructions.
Campus Applicable
No
Internationally Applicable:
No
1/15/2016 – Updated: 4/7/2016
Form Update
Campus Applicable
No
Internationally Applicable:
No
5/9/2011 – Updated: 2/14/2015
Reference Guide Correction
Description of change:
Note the following addenda under \'Calculating Materials Costs to Achieve MR Credits\' on page 337:Add the following after "...Furniture and Furnishings as long as this is done consistently across all MR credits.", "Exclude artwork, interior plants, and musical instruments."
Campus Applicable
No
Internationally Applicable:
No
2/1/2010 – Updated: 2/14/2015
Reference Guide Correction
Description of change:
In the sixth line of the second paragraph, replace "higher value (actual cost) in the calculations" with "higher value (actual cost) cost of the new equivalent item in the calculations"
Campus Applicable
No
Internationally Applicable:
No
4/1/2012
LEED Interpretation
Inquiry:
When a LEED NC project attempts LEED CI Indoor Environmental Quality credit 4.5: Low Emitting Materials - Systems Furniture and Seating as an Innovation in Design strategy, are they required to include the furniture costs in Materials and Resources credits 3 thru 7?
Ruling:
No, LEED NC projects are not required to include furniture in their calculations for MR credit 3-7 if using low emitting furniture for an ID strategy. LEED Interpretation #3901 states that although furniture does not have a dedicated credit in the New Construction rating system "since furniture can have an effect on indoor environmental quality, projects that include furniture in the scope of work are eligible to apply for an innovation credit based on LEED for Commercial Interiors (LEED-CI) IEQ credit 4.5, Low-Emitting Materials - Furniture." For project teams pursuing this credit as an ID strategy, the cost of the furniture is not required to me included in the total materials cost in Materials and Resources credits 3,4,5,6, or 7. The intention of this ID strategy is to easily reference a set of rigorous Indoor Environmental Quality requirements relating to furniture. While it is not required to include furniture in Materials and Resources credits project teams are encouraged to look for sustainable criteria synergies when purchasing furniture.
Campus Applicable
No
Internationally Applicable:
No
3/10/2008
LEED Interpretation
Inquiry:
Materials & Resources credits 3 through 7 state a default percentage of 45% of the total construction hard cost can be used as the Total Materials Cost for a project. We assume this is based on the U.S. construction market. We are working on a project in Europe that is pursuing a Platinum rating, for which the project team believes a more accurate default would be close to 30% of the total construction hard cost attributed to materials cost, while the other 70% is attributed to labor. This is due to the fact that in the European construction market, the labor costs far exceed the material costs, when compared to the United States market. Can we use a different percentage if we provide a letter from a reputable Contractor from Europe stating this fact? If not, what documentation would we need to provide in order to establish a more accurate default percentage for European projects? Please note that in Europe, it is very common to have no submittal process, making it very challenging to collect LEED documentation. The easier we can make it to gain accurate documentation information, while making the real goal to meet the credit requirements and intents, the better experience this project team will have implementing LEED on their project. This will increase the versatility of LEED, making it easier to implement, while still maintaining the same credit requirements and its establishment as a universal metric.
Ruling:
The project team is requesting a lower default percentage of total construction costs to qualify for MR credits 3 through 7. The project team states that due to the increase labor costs in Europe, materials account for a lower percentage of total construction costs. However, European markets vary - similar to the micro-markets in the US. One letter, from one contractor would not provide enough substantial evidence to support altering the default percentage for an entire continent. However in this instance, the project team does not need to use the default percentage. For MR credits 3 through 7 the project team has the option of using EITHER the default percentage (45%) or providing the actual materials costs (excluding labor and equipment). By following the latter approach, the project team will be able to determine if they meet the credit requirements based solely on the cost of materials. Additionally, please note that per MRc5.1 ruling 5/24/2004 and MRc4.1 ruling 8/29/2003 - if any materials outside of Division 2 through 10 are included in the total materials cost, they must be included consistently in all calculations. Applicable Internationally; Europe.
Campus Applicable
No
Internationally Applicable:
Yes
3/20/2009
LEED Interpretation
Inquiry:
With the recent down turn of the economy there have been many building materials that have been fabricated for buildings that will never be built. On our project, we have sourced structural steel that was already fabricated and ready to be installed in a project that will not be built. This idle steel has been resurrected to be used in a new job. To refurbish the steel, the rust has been grinded off and the ends of each beam are cut off where the old connecting plates were previously attached. The remaining length of each beam will be used in our project when possible. This will prevent the old beams from being scrapped, thus reducing the demand for virgin materials and reducing waste. Please clarify: does this reuse of structural steel contribute to Materials and Resources Credit 3, Material Reuse?
Ruling:
The project has requested a clarification regarding the reuse of steel beams that were not used for the originally specified project. Page 265 of the LEED NC 2.2 Reference Guide states for materials obtained off-site "the primary stipulation for qualifying as reused is that they have been previously used." This upholds the CIR ruling on 8/14/2003 that indicates that "the intent of the credit is to extend the life-cycle of building materials through re-use, rather than re-manufacture." This structural steel reuse does not contribute to MRc3. Applicable Internationally.
Campus Applicable
No
Internationally Applicable:
Yes
11/4/2002
LEED Interpretation
Inquiry:
This credit inquiry seeks clarification on how to account for reuse of materials "harvested" from an existing building for reuse in the same building. By definition, on page 188 of the Reference Guide: "Salvaged materials are construction materials recovered from existing buildings and reprocessed for reuse in other buildings." This seems to imply that materials from an existing building cannot be counted as salvaged materials if they are reinstalled in the same building.Our project includes deconstruction of a number of building components with the specific intent of reprocessing them for reinstallation into the building. For example, about 11,000 board-feet of old-growth timbers were harvested from the demolition of existing roof framing. The wood was milled and used throughout the building for architectural millwork features. Clearly, reprocessing was almost total. Also, over two hundred (200) doors were removed, restored to their original finish, fitted for new hardware, and reinstalled. About half were reinstalled into different locations. Some reprocessing was required. A number of other components, such as tack boards, blackboards, and display cases, were harvested, protected and reinstalled into new locations. The only reprocessing was to recondition and reinstall the components.We seek LEEDTM credit for the extensive salvaging work that was accomplished. To exclude the harvesting program we undertook seems an unintended consequence of the definition of salvaged materials. Can we include materials harvested from the building as salvaged materials? We have also considered the potential of applying for an Innovation credit for conducting a "harvesting" program. Is that a better approach?
Ruling:
It is important to make a distinction between salvaged building materials and building reuse. The goal of this credit is to reduce energy and resource impacts associated with production of new building materials, and also to encourage the development of a market in salvaged building materials.Credit MR 1; Building Reuse is intended to encourage the reuse of existing building shells and interiors. Components of an existing building which are reused in-situ are considered to apply toward the building reuse credit, not as salvaged materials.In this case, the roof timbers which were removed and reprocessed meet the intent of the salvaged material credit, since they apparently could not have been used for their current function in the existing building, but were salvaged for other valuable building components.However, the doors represent a component of the building which was reused as the same product, for the same purpose, in the same building. This type of reuse represents the goals of MR Credit 1.3, and thus can contribute to achieving the required 50% threshold for interior component reuse.Note that the materials in question cannot be counted simultaneously toward multiple credits (I.e. MR Credits 1,2,3,4,6, and 7). See page 187 of the Reference Guide for this discussion. Applicable Internationally.
Campus Applicable
No
Internationally Applicable:
Yes
10/1/2013
LEED Interpretation
Inquiry:
For retail projects, what items are considered casework and built-in millwork that must be included in the base building documentation (in MRc3-7 and IEQc4.4), rather than furniture?
Ruling:
There are typically two types of casework found in projects. The first is casework that is custom built – often from shop drawings – and specified in CSI Division 6. Included are custom millwork cabinets, countertops, custom desks, shelving, etc. These are base building (or real property) elements considered permanently installed. They may be assembled on or off-site.
The second type of casework is manufactured furniture. It is usually ordered from a catalog and found in the project specifications in CSI Division 12. These items are considered furniture and included in ID&C projects and only included in BD&C projects when they are consistently used in calculations. They are not base building items. Included in Division 12 are individual and group seating, open-plan and private-office workstations, desks, tables, storage units, credenzas, bookshelves, filing cabinets, and wall-mounted visual-display products (e.g., marker boards and tack boards). Items such as electronic displays and miscellaneous items, such as easels, mobile carts, and desk accessories are not included in the credits.
Sometimes furniture is semi-permanently attached using mechanical fastening systems due to operational use. These are not permanently installed and therefore are not base building elements. An example in a retail or hospitality setting would be a display that is bolted to the floor or moveable / semi-permanently-attached manufactured shelving. Consider these guidance definitions:
Permanently installed building product – in addition to those items that serve structural purposes, permanently installed building products are items that are affixed to the building without intention to be removed, either because the item is integral to the walls, ceiling, or floor, or removing the item will cause damage to building (i.e. real property vs. personal property). Examples include items found in CSI MasterFormat Division 6- Millwork as well as wall, floor, or ceiling finished such as ceramic tiles, or drywall, window and door frames (unless part of removable partitions, see definition for furniture), baseboards, siding, roofing, masonry, and permanently installed built in casework, such as shelving or countertops. Exceptions may exist for these examples.
Furniture - Items that are non-permanently affixed are considered furniture. This includes items that do not serve structural purposes and may be removed without damage to real property. Examples include desks, chairs, filing systems, retail displays, or removable partitions (including drywall and glass system partitions including doors) that can be readily removed and reused without damage to other partitions, ceilings, floors, or structure. Typically these items fall under CSI MasterFormat 2010 Division 12-Furniture, however some items may be specified in other divisions and there are exceptions to these examples.
Real Property – consisting of immovable portions of building. Distinguished from personal property. Items installed by tenants or for temporary use are considered personal property and not real property.
Campus Applicable
No
Internationally Applicable:
Yes
9/15/2006
LEED Interpretation
Inquiry:
Our project relocates an existing visitors center building to a nearby site. After relocating the building, an expansion to the building will be constructed equaling approximately 45% of the original building size. The foundation under the original visitors center building has to be abandoned and a new foundation is being provided. The function of the building and the ownership remain the same. A credit interpretation request (MRc32 ruling 11/4/2002) states that the Building Reuse credit is for buildings reused in-situ. This negates our ability to apply the existing building stock to the Building Reuse credit. We ask that you confirm this conclusion. We would like to pursue credits under Materials and Resources-Resource Reuse using the value of the existing building components. The value of the components will be substantial and we will likely pursue an exemplary performance credit as well. Please confirm the validity of applying the existing building\'s component values to the MRc3.1 and 3.2 points.
Ruling:
The project team is requesting confirmation that a building relocated to the LEED project site is ineligible for credit under MRc1 - Building Reuse. Should that ruling be confirmed, the project is requesting to apply the existing building components retained in the relocated project to the reuse materials component in MRc3. Relocated buildings are indeed ineligible for credit under MRc1. Relocation of existing building shell and components is consistent with the reuse of salvaged materials, and application of these reused materials to the MRc3 calculation is acceptable. Applicable Internationally.
Campus Applicable
No
Internationally Applicable:
Yes
7/2/2008
LEED Interpretation
Inquiry:
Our project team is requesting the ability to contribute Renaissance Specialty Veneer Product, Redwood Veneer towards MRc3.1 credit achievement. The intent of MRc3.1 is to reuse building materials and products in order to reduce demand for virgin materials and to reduce waste, thereby reducing the impacts associated with the extraction and processing of virgin resources. The redwood veneer product is produced from salvaged redwood logs which have been blown down or damaged during natural forest fire. Utilizing salvaged redwoods reduces the degradation associated with the extraction of virgin timber from sensitive forests. Renaissance Specialty Veneer Products has certified the harvesting of redwood trees through the Forest Stewardship Council (SCS-COC-00872). The FSC Chain of Custody number tracks the wood through the production process ensures that the sourcing of the redwood veneer is both socially and environmentally responsible. Our project is requesting recognition for the use of innovative new products which provide environmental benefit and meet the intent of the credit requirements. By salvaging and utilizing downed trees, Renaissance Specialty Veneer is reducing the stress placed on natural forests and demand on virgin resources. As product sourcing and material options continue to grow and become more unique, our project team is interested in selecting products which contribute to the progressions of sustainable principles and environmental stewardship. Please confirm whether our calculation of FSC Certified Salvaged Redwood Veneer towards MRc3.1 credit achievement is acceptable.
Ruling:
The project team is requesting clarification on whether products that contain salvaged logs can be considered a reused material. No, while the materials described likely qualify for MRc7, reused materials are materials that were manufactured, used for their intended purpose, and are being included in a build-out for that same purpose again. Items that were never placed into service, but are being re-sold, are not salvaged material. Applicable Internationally.
Campus Applicable
No
Internationally Applicable:
Yes
5/24/2004
LEED Interpretation
Inquiry:
Previous CIRs indicate that the mechanical and electrical components are to be excluded from the calculations for Materials & Resources credits 3, 4, 5 & 6. Please confirm that the total material cost excludes these components as well. The total material cost will either be the actual material costs of the Div 1-10 subcontractors or 45% of the total construction cost of the Division 1-10 subcontractors.If items from division 15 or 16 are assembled locally and can be included in the numerator for the total of the Regional Materials calculation, should the materials cost from division 15 and 16 be added to the denominator as well? Please clarify
Ruling:
CORRECTION, 10/25/05: To attain the materials cost using the default calculation option: begin with the total subcontractor charges (to the General Contractor) for CSI MasterFormat 1995 Divisions 2 through 10 ONLY (instead of all Divisions, as indicated in the original ruling). Applying 45% to this number (as the Letter Template does) will result in a conservative estimate of the materials costs in those Divisions.-----------------------------------------------------Original ruling:To use the default 45% calculation to generate a total materials value, project teams must enter total subcontractor costs of all MasterFormat Divisions. This is noted in the LEED v2.1 Letter Template. The resulting cost solely represents materials in Divisions 2-10 (currently this is not indicated in the Letter Template, but should be). These Divisions include the principal items that are considered in MR Credits 3 through 6. Materials in Div 11 through 14 are optional (item by item), and if included must be added to the numerator and denominator of the equation.If a project team chooses not to use the 45% default calculation to generate a total materials value, then follow the guidance provided in MR Credit 4.1 CIR ruling dated 8/29/2003: Materials in CSI MasterFormat Divisions 2 through 10 must be included. If a project team chooses to include additional items as part of the base material costs it should do so for all relevant material credits, which include MR Credits 3, 4, 5 and 6. See the MRc4.1 8/29/03 ruling for further details. Applicable Internationally.
Campus Applicable
No
Internationally Applicable:
Yes
4/13/2007
LEED Interpretation
Inquiry:
Kalamazoo College\'s Hicks Student Center is an existing building that houses a number of campus functions. To create a more dynamic Student Center, the building is currently undergoing a significant renovation. The existing food service and dining areas will be relocated from one part of the building to another area within the building. The Materials Reuse credit requires a 5% reuse of salvaged, refurbished or reused materials based on the total material value of the project. The credit does not allow mechanical, electrical and plumbing equipment to be included in the 5% material cost required. There are several new pieces of food service equipment in the renovated kitchen and food service area, but a significant portion of the existing equipment can be refurbished and reused. We do not consider the reused kitchen and serving items to be mechanical or electrical, but necessary equipment that is required for functionality of the space. Rather than simply discarding the existing and purchasing new equipment, we are responsibly reusing existing equipment that has remaining useful life, and would like to confirm your support in their application to MR credit 3.1. The example below is provided to show our calculation methodology: Value of contracts including Food Service Equipment: $5,680,133 + $1,165,000 = $6,945,133 Total material cost based on 45% (including Food Service Equipment): $6,8456,133 x .45 = $3,080,310 5% of material cost (reused materials): $3,080,310 x .05 = $154,016 Estimated Material cost for reused food service equipment = $200,000 (6.5%)
Ruling:
Consistent with the LEED-NC v2.2 Reference Guide, mechanical, electrical and plumbing components and specialty items such as elevators and equipment cannot be included in calculations for this credit. This credit is primarily for those materials in CSI Divisions 2-10, which is consistent with MRc4 and MRc5. Applicable Internationally.
Campus Applicable
No
Internationally Applicable:
Yes
LEEDuser expert
Susie Spivey-Tilson
susie.spivey@cbre.com
CBRE
LEED Fellow, Senior Program Manager for Global Energy & Sustainability
