Under Behind the Intent, Beta update, replace the first paragraph with:
The ASHRAE standards have been updated to newer versions:
 ASHRAE 62.1-2010-> ASHRAE 62.1-2016 (updated version)
 ASHRAE 170-2008 and FGI 2010 -> ASHRAE 170-2017 (updated version)
Option 2 is available for use through regional compliance pathways.
 EN 13779-2007 ->EN 16798-3:2017 (local applicability)

Under Behind the Intent, add a sentence at the end: The following language has been moved from the credit requirements to the reference guide: “Also prohibit smoking outside the property line in spaces used for business purposes.”

In alphabetical order, insert the following text:Alliance for Water Efficiencyhttp://www.allianceforwaterefficiency.org/The Alliance for Water Efficiency provides information and assistance onwater conservation efforts.

Insert the term "Tenant space" in alphabetical order with the accompanying text "Tenant space is the area within the LEED project boundary. For more information on what can and must be in the LEED project boundary see the Minimum Program Requirements (MPRs) and LEED 2009 MPR Supplemental Guidance. Note: tenant space is the same as project space."

For "Nonflat Coatings" in row nineteen, remove the value "150" from the "Current Limit" column and insert in the "1/1/03" column

In the second paragraph, replace the third sentence with the following: The sustainable purchasing policy must adhere to the LEED 2009 forExisting Buildings: Operations & Maintenance policy model located inthe Introduction section of this Reference Guide.

Replace the paragraph with the following:In certain cases, faucets with low-flow rates are not appropriate. Forexample, in kitchen sinks, faucets are used to fill pots and buckets.Using a low-flow rate for tasks where the volume of water ispredetermined does not save water and will likely cause userdissatisfaction and inefficiencies. Consider alternative strategies toreduce water use, such as installing special-use pot fillers and faucets orfoot pedal-operated faucets.

In the third line of the fourth bulleted item, replace "4" with "3" so the text becomes "See Table 3"

Remove the fifth bulleted item

In footnote "b," replace "2.0 gmp" with "2.0 gpm"