100002396
Step-by-Step Guidance:
Step-by-Step Guidance:
Insert the term "Sealers" in alphabetical order with the accompanying text "Sealers are coatings applied to either block materials from penetrating into or leaching out of a substrate, to prevent subsequent coatings from being absorbed by the substrate, or to prevent harm to subsequent coatings by materials in the substrate."
Insert the term "Tenant space" in alphabetical order with the accompanying text "Tenant space is the area within the LEED project boundary. For more information on what can and must be in the LEED project boundary see the Minimum Program Requirements (MPRs) and LEED 2009 MPR Supplemental Guidance. Note: tenant space is the same as project space."
Replace the text with "Breathing zone is the region within an occupiedspace between 3 and 6 feet above the floor. Note that this definitionvaries from that of ASHRAE 62.1-2007, which states that the breathingzone is between 3 inches and 6 feet from the floor, and 2 feet from thewalls as well as fixed air conditioning equipment."
In the box, replace all instances of "(sf)" with "($)" so the text becomes "Replacement Value of Reused Furniture and Furnishings ($) / Total Value of New and Reused Furniture and Furnishings ($)"
In the first line of the first paragraph, replace "qualified" with "eligible" so the text becomes "...ENERGY STAR
change "See Table 6 for sample values. (Note: If a species does not require irrigation once it is established, then the effective Ks = 0 and the resulting KL = 0.)" to "See Table 7 for sample values."
change "A certified landscape professional or irrigation professional should assist the project team with the calculation. If no professional is involved, use the most conservative assumptions (i.e., assumptions that result in the highest "as-designed" water use rate)." to "A landscape professional must perform the calculation. This includes individuals with certification, licensure, formal training (higher education), or at least 10 years of professional experience."
"6.3-6.9" change to "6.1 - 6.3"