See all forum discussions about CI-v4 EQc2
 Subscribe to new posts about CI-v4 EQc2 Post a new question aboutCI-v4 EQc2
See LEEDuser’s guidance on CI-v4 EQc2»
FAQs about EQc2 :

Is all solid wood considered inherently non-emitting? I’ve seen sources that say only solid wood flooring counts as inherently non-emitting.

Is there a VOC budget method for this credit?

What are the limits on the VOC budget method?

Do products applied to the weather barrier need to comply with VOC thresholds? 

If one part of my multicomponent wall system is not compliant, can I still get full credit?

Our building is atypical, and the walls and ceilings are not clearly defined. How should we classify these components? 

Are throw rugs subject to the credit requirements?

If a ceramic tile receives a top coat after it is manufactured, is it exempt from the credit requirements?

What are the adhesives and sealants to be included in the documentation?

I'm looking for a certification that tells me if a given product will meet the LEED v4 requirements, but I don't see one in a given product area. Am I missing something?

When products claim that they meet California Section 01350, does the product also meet LEED v4 requirements for low-emitting materials?

How do I know if a product complies with LEED v4 or if it was tested under an older non-compliant standard?

In past versions of LEED, it was easy to specify VOC limits. Is the specification process the same for LEED v4?

View answers »

Forum discussion

CI-v4 EQc2:Low emitting materials

14 days VOC Emissions Rate

One of the internal paints in the project is Greenguard Gold Certified. The TVOC content is 0.22 mg/m3. For VOC content, the threshold limit is fulfilled. However, there is no information on the 14-day emissions rate. Do we need to check the emissions rate or is it acceptable because the material is Greenguard Gold Certified?

Thank you.

 

0
Post a reply

You rely on LEEDuser. Can we rely on you?

LEEDuser is supported by our premium members, not by advertisers.

Go premium for $15.95  »

Add new comment

To post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.