What it the percentage of renewable energy needed for Core and Shell for exemplar performance?
You rely on LEEDuser. Can we rely on you?
LEEDuser is supported by our premium members, not by advertisers.
Go premium forForum discussion
CS-v4.1 EAc5: Renewable Energy
See LEEDuser’s guidance on CS-v4.1 EAc5 »
Exemplary Performance for CS
Add new comment
To post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.
Marcus Sheffer
LEED Fellow7group / Energy Opportunities
LEEDuser Expert
5907 thumbs up
June 27, 2024 - 4:06 pm
You can look that up in the v4.1 Guide published on the USGBC website. https://www.usgbc.org/articles/leed-link-leed-v41-guides
Here is what it says:
Exemplary Performance
Tier 1: renewable energy generation meets or exceeds 25% of total site energy use.
Tier 2: renewable energy procurement meets or exceeds 60% of total site energy use.
Exemplary performance is not available for Tier 3 renewable energy procurement.
Sofia Barahona
B-green Chile8 thumbs up
June 28, 2024 - 9:15 am
Thank you, Marcus. I reviewed the Reference Guide v4.1 and I am wondering if the exemplary performance compliance threshold applies to all Rating Systems, as in v4 there is a different threshold for Core and Shell.
Marcus Sheffer
LEED Fellow7group / Energy Opportunities
LEEDuser Expert
5907 thumbs up
June 28, 2024 - 9:26 am
Did you check the Interpretations? That is the only other place I can think of that would differentiate the rating systems in v4.1 since it has not been incorporated into the Reference Guide.
Sofia Barahona
B-green Chile8 thumbs up
June 28, 2024 - 12:25 pm
I will check. I have also directly contacted the GBCI with this inquiry. I will post their response as soon as I receive it.
Thank you once again, Marcus.
Sofia Barahona
B-green Chile8 thumbs up
June 28, 2024 - 1:51 pm
I got this answer:
"Dear Sofia,
Yes, USGBC confirmed that the thresholds are the same for all rating systems"
So it seems there is no threshold variation on this credit on v4.1